How to Align in Procreate
StyleFrame Team8 min read
To align objects in Procreate, select the layer, tap the Transform arrow, open Snapping in the bottom toolbar, and turn Snapping on. As you drag, gold guides show the canvas edges and center, and blue guides show alignment with content on other layers. Procreate has no one-click align or distribute buttons like After Effects' Align panel, so precise placement relies on snapping, the 2D Grid drawing guide, and nudging.
How to Align Objects in Procreate: Step by Step
- Put the element you want to move on its own layer. If it shares a layer with other artwork, use the Select tool to isolate it first.
- Tap the Transform arrow (the cursor icon) in the top toolbar. A bounding box appears around the layer's contents.
- Tap Snapping in the bottom toolbar and switch on Snapping. Switch on Magnetics if you want to slide along a guide.
- Drag the object from inside the bounding box and watch for the guides.
- Release when the guide appears. Tap the Transform icon again to commit.
The rest of this article covers each step in more detail, plus the workarounds you'll need for jobs snapping can't do.
Turn On Snapping in the Transform Tool
Alignment guides in Procreate live inside the Transform tool, which is why many people think they're missing. If you can't see any guides, you're probably in a different tool, or Snapping is toggled off.
Activate Transform, then look at the bottom toolbar. Tapping Snapping opens a panel with four controls: two toggles (Snapping and Magnetics) and two sliders (Distance and Velocity). Once Snapping is on, guides appear as you move the layer's contents. You may need to toggle it on and off at different points in a project, so check it when guides stop appearing.
If you work in After Effects, think of this as smart guides for a single layer, not a full alignment panel. It tells you when you've hit a relationship, but it won't compute one for you.
Read the Guides: Gold vs. Blue
Procreate uses color to tell you what you're aligning to:
- Gold (yellow) guides mark the canvas: its edges and its horizontal and vertical center. When both center guides appear at once, the object's bounding box is centered on the canvas.
- Blue guides mark alignment with content on other layers, such as matching edges or centers.
Snapping works from the bounding box of the layer or selection, not from the visible shape of your artwork. If a layer contains stray pixels, faint strokes, or a mask that extends to the canvas edge, the box is bigger than what you see, and the object will look off-center even though the guides say it's centered. Trim the layer to the artwork you intend to align, or select only that artwork before transforming.
Tune Distance, Velocity, and Magnetics
The default behavior can feel grabby or too weak depending on the job. The four controls work like this:
- Snapping turns the guides and the snap behavior on.
- Magnetics lets an object slide along a guide. If you're moving something vertically and want zero horizontal drift, Magnetics keeps it on the line.
- Distance sets how close an edge has to be to a guide before it jumps to it. A low value demands near-exact placement. A high value snaps from farther away.
- Velocity controls how readily the object engages guides while you move. At the low end, guides barely activate. At the high end, the object catches on everything.
A practical starting point for layout work is a higher Distance and moderate Velocity, so guides are easy to catch without everything snapping at once. When you're placing something freely, such as a painterly element that shouldn't look mechanical, turn Snapping off so it stops fighting your hand.
Center an Object on the Canvas
- Select the layer and open Transform with Snapping on.
- Drag the object toward the middle of the canvas.
- Watch for the gold vertical guide (horizontal centering) and the gold horizontal guide (vertical centering).
- When both appear, lift your finger or stylus.
If you only need one axis, such as a logo that must sit on the center line but at a specific height, enable Magnetics so the object glides along the center guide while you adjust the other axis.
Align One Layer to Another
For aligning a layer to another layer's content, the process is the same, but you watch for blue guides. This is useful for things like:
- Lining up a title with the edge of a shape on a different layer.
- Placing a mirrored element, such as a reflection, against its source.
- Matching the baseline of elements drawn on separate layers.
Keep the reference layer visible. Guides generally respond to visible content, so hiding the target layer removes the thing you want to snap to. For mirrored work, flip the layer first with Flip Horizontal or Flip Vertical in the Transform toolbar, then use the guides to set the position.
Use the 2D Grid for Fixed Positions
Snapping covers relationships between objects. When you need positions on a consistent structure, such as a column layout or evenly spaced elements, use the drawing guide.
- Open the Actions menu (wrench icon).
- Go to Canvas and turn on Drawing Guide, then tap Edit Drawing Guide.
- Choose 2D Grid.
- Adjust the grid size. You can tap the size readout to type a value, including in physical units rather than pixels.
- Tap Done.
Now transform each layer and line its bounding box up with grid lines. Because the box is rectangular, matching edges and corners to the grid is straightforward. Drag from outside the bounding box when you want to move without risking scale or distortion from the handles.
Evenly spacing several objects is manual in Procreate: you set a grid, then place each object on it. It's slower than distribute in other apps, but it's reliable.
Nudge for Pixel-Level Precision
Once you're close, nudge instead of dragging. With the Transform tool active, tapping outside the bounding box on the side you want to move toward shifts the selection by a small increment. This is the best way to fine-tune after snapping gets you most of the way there.
Center Stubborn Layers with the Fit to Screen Trick
Snapping aligns to the bounding box, which causes trouble when a layer includes masked or clipped content that reaches the canvas edge. A community workaround uses Transform's Fit to Screen option:
- Group the layers you want to center.
- Inside the group, add a new layer and draw a line that touches the left and right edges of the canvas, passing through the vertical middle of your artwork.
- Select the group, open Transform, and choose Fit to Screen. Because the group already spans the width, the move centers it vertically.
- Clear that layer and draw a line that touches the top and bottom edges instead.
- Run Fit to Screen again to center horizontally.
- Delete the helper layer.
It's clumsy, but it works when the bounding box is misleading. It breaks down if other content in the group already reaches the canvas edges, because that content also affects the result. Test on a duplicate group before applying it to final art.
What Procreate Can't Do (Yet)
Set expectations before you build a workflow around it:
- There's no automatic align-left, align-center, or align-right command for multiple layers.
- There's no distribute-spacing command.
- Alignment is based on bounding boxes, not on the visible shape of your artwork.
For production layouts that need numeric precision, build the final composition in your layout or compositing tool. Procreate is best for getting artwork consistently placed during creation.
Keep Alignment Consistent When Procreate Art Moves into Motion
Alignment matters more when Procreate art becomes a source for animation. If you're painting keyframe poses, style frames, or reference sheets, a character or prop that shifts a few pixels between frames will read as jitter once it's interpolated or composited.
A few habits help:
- Use the same canvas size for every frame, and center the anchor element with the gold guides so it sits in the same place across files.
- Keep one subject per layer, so you can realign or replace it without touching everything else.
- Mark a baseline or anchor with a drawing guide, then export frames with the guide hidden.
- Export at full resolution and keep your layer structure intact so you can revise later.
Troubleshooting Alignment in Procreate
Guides don't appear. Make sure you're in Transform and Snapping is on. Check that Velocity isn't set so low that guides never trigger.
The object snaps but looks off-center. The bounding box includes stray marks or masked content. Clean up the layer or select only the artwork with the Select tool before transforming.
The object jumps unpredictably. Lower Distance or Velocity, or turn Snapping off while you place the object freehand.
You distorted the artwork while moving it. Drag from outside the bounding box, or ensure you aren't grabbing a corner handle.
Nothing snaps to another layer. Make sure the target layer is visible and contains content in the area you're moving toward.
Quick Reference
Procreate's alignment is simpler than what you're used to in After Effects or Photoshop, but it's consistent once you know that guides live in Transform, gold means canvas, and blue means other layers. Set up snapping, use the grid when you need structure, and nudge for the last pixels.