How to Adjust Line Thickness in Procreate
StyleFrame Team8 min read
To adjust line thickness in Procreate, use the top slider in the left sidebar to set brush size before you draw. Then tune each brush's minimum and maximum size in Brush Studio so Apple Pencil pressure produces the line weights you want. Procreate is a raster app, so a stroke can't be re-weighted after it's drawn. To thicken existing lines, use workarounds like Liquify's Expand mode, duplicated and offset layers, or redrawing on a separate layer.
The Quick Version
- Before drawing: drag the top slider (size) on the left sidebar. The bottom slider controls opacity.
- For consistent behavior: open Brush Studio (tap the active brush in the library) and edit the Properties and Apple Pencil settings.
- After drawing: you can't change stroke width directly. Thicken lines using Liquify, layer duplication, or a redraw.
- For production work: pick your canvas resolution first, because brush size is relative to canvas pixels.
Change Brush Size Before You Draw
The size slider is the fastest way to control line thickness. Drag it up for thicker strokes and down for thinner ones. While you drag, Procreate shows a preview circle and a percentage value. Tapping and holding the slider's handle lets you make smaller adjustments without losing your place.
Two details matter if you work professionally:
- The percentage is not a pixel value. The same 20% produces a visibly different line on a 2000 px canvas and on a 6000 px canvas. If you match line weight across several illustrations, keep canvas dimensions identical.
- Size interacts with pressure. With an Apple Pencil, the slider sets the ceiling of what a stroke can reach, and pressure moves the stroke between a minimum and a maximum. If your lines feel too thin even at a high slider value, pressure settings are often the cause, not the slider.
Control Thickness Through Brush Studio
If you find yourself resetting the slider constantly, the brush itself probably needs adjusting. Tap a brush in the library to open Brush Studio. These areas affect line weight the most:
Properties
The Properties tab contains Maximum Size and Minimum Size. These define how far the brush can scale relative to the slider setting. Raising the minimum size gives you a more uniform line, since light pressure can no longer thin the stroke dramatically. Lowering it creates more expressive, tapered strokes.
Apple Pencil
The Apple Pencil tab controls how pressure and tilt change the stroke. Adjust the size pressure response to make a brush respond more or less to how hard you press. For clean, consistent outlines, reduce pressure sensitivity on size. For ink-style variation, increase it.
Stroke Path and Stabilization
Streamline and stabilization don't change thickness directly, but they affect how thickness looks. Smooth, stabilized curves make width transitions look more intentional, especially on long contour lines.
Pressure Curve
In the Actions menu, under Prefs, you can edit the global pressure curve. If every brush feels too light or too heavy, fix it here once instead of adjusting each brush.
Tip: Duplicate a brush before editing it. Name the copy something like "Line Art – Medium" so you can return to a reliable thickness setting whenever you need it.
Why You Can't Re-Weight a Stroke After Drawing
This is the most common frustration. In a vector program like Illustrator, a stroke is a path with a width attribute you can change at any time. In Procreate, a stroke is converted to pixels the moment you lift the pencil. There is no path to edit, so there is no stroke-width control to adjust afterward. Procreate's team has said that modifying a stroke's line weight after it has been applied won't be coming to the app, and community members note that it's more of a vector feature and Procreate is raster-based.
Your options are to plan around it or work around it.
How to Thicken Lines You've Already Drawn
None of these gives you a true "line weight" control, but they cover most situations.
1. Keep Line Art on Its Own Layer
Every method below works better if your line art lives on a dedicated layer, separate from color and shading. This is the single best habit for flexible line work. Color Drop doesn't honor lines that are on a different layer, so check how your fills behave once the lines are separated.
2. Use Liquify's Expand Mode
Select the line art layer, then open Adjustments and choose Liquify. Switch to the Expand mode and brush over the areas you want to thicken. This works locally, so you can fatten a few weak strokes without touching the rest. The drawback is that edges can soften or distort if you push too far.
3. Duplicate, Offset, and Merge
This is a classic raster trick:
- Duplicate the line art layer.
- Move the copy a pixel or two using the Transform tool and small nudges.
- Merge the copy with the original.
- Repeat in other directions (left, right, up, down) for an even outline.
Keep the original as a hidden backup so you can compare. This method adds only slight thickness, and the edges can look stepped or pixelated depending on the brush you used.
4. Duplicate and Merge Many Times
Another variant is to duplicate the layer many times and merge the copies together, then repeat on the merged result. It builds up density gradually. The result is subtle, and it can look rough, so treat it as a quick fix rather than a polished one.
5. Blur, Then Tighten
If your line art is dark lines on a white or flattened layer, you can apply Gaussian Blur, then use Curves to push the grays darker. The blurred edges expand, then the curve hardens them again. It produces smooth, uniformly thicker lines. Test it on a duplicate first, since the result depends on your layer setup and blend mode.
6. Redraw on a New Layer
Sometimes the most reliable answer is to trace over the original on a new layer with a bigger brush size. It takes longer, but you get clean, intentional strokes. Lower the original layer's opacity and use it as a guide.
Transform Is for Length and Position, Not Weight
You can select a layer and use Transform to stretch or reposition a line, which helps with straight lines drawn on their own layer. But scaling a layer scales the whole drawing on it, line weight included, so it isn't a substitute for changing thickness.
Plan Canvas Size and Resolution First
Because the line is baked into pixels, the choices you make at the start of a project determine how much flexibility you have later:
- Work at the final delivery size or larger. Thin lines on a small canvas turn mushy if you scale up. If the art will land in a 4K timeline, set up your canvas with that in mind.
- Keep size settings consistent across a set. For a sequence of frames or matching illustrations, use the same canvas size and saved brush so line weight doesn't drift.
- Draw a bit heavier than you think you need. Thick lines can be thinned more cleanly than thin lines can be thickened, and downscaling for video usually reduces apparent weight.
Moving Procreate Linework Into a Motion Pipeline
If you're a motion designer or animator, Procreate line art often ends up in After Effects or another compositing tool. Export layers as PNGs with transparency, or export a PSD to keep your layer structure. Once the art is in your timeline, you have more tools for adjusting weight:
- After Effects: effects such as Simple Choker or Minimax can grow or shrink the matte of a line layer. They work well for small adjustments and can be animated, though they won't give you vector-quality edges.
- Vector conversion: if you need true adjustable stroke width, trace the art in Illustrator and bring it into After Effects as shape layers, where stroke width is a property you can keyframe. Expect to clean up the traced paths.
- Resolution: export at the highest resolution you can, so any later scaling doesn't make your lines look soft.
Troubleshooting Common Problems
My lines are too thin even with the slider turned up. Check Minimum Size and the pressure response in Brush Studio. Light pressure may be thinning the stroke.
Lines look different on a new canvas. Brush size is relative to canvas pixels, so a different canvas resolution changes the apparent thickness.
Thickened lines look jagged. Offset-and-merge methods can leave stepped edges. Try the blur-and-curves approach, or redraw the lines at a larger size.
My fills ignore the lines. Color Drop doesn't honor lines that live on a different layer. Use reference layers or fill underneath the line art layer instead.
I need to change line weight across a whole project. That's a sign to use a vector workflow, or to redraw with a saved brush at the correct size from the start.
Key Takeaways
Procreate gives you strong control over line thickness while you draw, through the size slider, Brush Studio's size limits, and pressure settings. It gives you very little control afterward, because strokes are raster pixels. Set up your canvas and brushes carefully, keep line art on its own layer, and use Liquify or layer techniques for small fixes. When you need real stroke-width control, take the art into a vector or compositing tool.