How to Adjust Apple Pencil Pressure Procreate
StyleFrame Team8 min read
To adjust Apple Pencil pressure in Procreate, tap Actions, go to Prefs, and choose Pressure and Smoothing. Drag the pressure curve up and to the left if you want heavier, darker strokes with a lighter touch. Drag it down and to the right if lines come out too thick or dark too easily. Tap Reset all at the bottom of the same menu to return to the default linear curve.
Where the Pressure and Smoothing settings live
Procreate applies one global pressure curve to every brush and the eraser. Open it like this:
- Tap the Actions icon.
- Select the Prefs tab.
- Tap Pressure and Smoothing.
You'll see a graph with two axes. The horizontal axis is how hard you press, from no pressure on the left to full pressure on the right. The vertical axis is how much effect that pressure has on the brush, from none at the bottom to maximum at the top. A straight diagonal line is the default: output rises evenly as you press harder.
Tap the line to add a node, then drag the node to reshape the curve. Small movements make a noticeable difference, so adjust gradually and test on a scratch layer after each change.
How to make the pencil respond to a lighter touch
The Apple Pencil has a wide dynamic range, which means reaching 100% opacity or full stroke width can take a lot of force. If you draw with a light hand, you may never use the top of that range with default settings.
To fix that:
- Open Pressure and Smoothing.
- Tap the middle of the curve to add a node.
- Drag the node upward and slightly to the left, so the curve looks like the left side of a steep hill.
Now the high-output part of the graph sits in the low-pressure region. The pencil produces thicker, darker, more opaque lines with less force. This is the right adjustment if you're fighting hand fatigue during long sketching sessions, or if your strokes look faint no matter how you draw.
How to make the pencil less sensitive
If strokes turn dark or thick too easily, you want the opposite curve: flat at first, then rising toward the right, like a ramp.
- Add a node near the center of the curve.
- Drag it downward and to the right.
With this shape, light pressure gives thin, light marks, and you have to press harder to reach full intensity. This suits heavy-handed artists, inkers who want more gradation across the pressure range, and anyone doing delicate shading or fine linework.
Adjusting smoothing and stabilization
The same screen has sliders at the top for global stabilization. Raising them smooths your strokes across every brush, which helps with clean contours, long curves, and consistent line quality. If you're tracing shapes for logo animation or drawing vector-like outlines, a bit of extra smoothing can save cleanup time.
Raise the sliders in small steps and match them to the task: more for inking, less for loose sketching.
Adjust pressure per brush in Brush Studio
The global curve is a blunt instrument. Procreate's brushes are tuned to work well for most people out of the box, and its own guidance is to change the global curve only when you need to. For finer control, go to a single brush's settings instead.
In Brush Studio, you can tie Apple Pencil input to specific brush behaviors:
- Pressure to size, so pressing harder gives a thicker stroke.
- Pressure to opacity, for buildup and soft shading.
- Tilt to opacity or other properties, so a brush fades as you angle the pencil.
- Pressure or tilt to scatter, color, or texture blending, for more experimental brushes.
If you have an Apple Pencil Pro, squeeze and barrel roll are also available, and barrel roll can be linked to properties such as hue or shape.
A practical workflow: set the global curve to fit your hand, then duplicate a brush and tweak its pressure response in Brush Studio. That way you don't break the other brushes in your set while tuning one for a specific job, like a tapered ink line for character outlines.
Common pressure problems and fixes
Lines get thick and won't thin out again
A common complaint is that a stroke gets thicker as you press but doesn't thin back down as you lighten up. Users in the Procreate community report fixes that usually come down to a few things:
- Check the pressure curve. A poorly shaped curve can make the response feel one-directional. Reset it, then adjust in small steps.
- Disable size taper or softness on the brush, which can interfere with how pressure maps to width.
- Slow down. Fast strokes can feel less accurate on an iPad than on a graphic tablet. Some users get a feel closer to Wacom tablets by nudging the bottom of the curve to the right a little at a time.
Pressure doesn't work at all
Pressure and tilt need a pressure-sensitive stylus that Procreate supports. A generic capacitive stylus works as a pointer but won't give you variable line weight. The Apple Pencil should work as soon as it's paired with the iPad; you don't have to connect it inside Procreate. If it isn't responding:
- Swipe down from the top right to open Control Center and make sure Bluetooth is on.
- Re-pair the pencil. For the 2nd generation and Pro, attach it to the side of the iPad and wait for the connection prompt and battery level.
- Check that the brush you're using actually has pressure assigned in Brush Studio.
I made a mess of the curve
Go back to Actions → Prefs → Pressure and Smoothing, scroll to the bottom, tap Reset all, and confirm. This restores both pressure and smoothing to their defaults, so you can start over cleanly.
Don't forget the double-tap shortcut
While you're tuning the pencil, set up the 2nd generation Apple Pencil's double-tap. In iOS Settings, you can choose to switch between the current tool and the eraser (the default), switch to the last used tool, show the color palette, or turn it off. In Procreate's Gesture Controls you can map it to actions such as Eyedropper, QuickShape, QuickMenu, or Clear Layer. For fast iteration, mapping the Eyedropper or an eraser toggle saves a lot of trips to the toolbar.
Why this matters for motion and VFX work
Many motion designers, animators, and VFX artists use Procreate for work that feeds into other tools: storyboards, style frames, hand-drawn textures, rotoscope-style overlays, and character or prop concepts. A pressure curve that matches your hand makes the line quality in those assets more consistent, which matters when they get scaled, animated, or composited later.
A few practical habits help:
- Tune pressure before a project, not during it. Changing the curve midway can make line quality inconsistent across frames or boards.
- Keep one brush for linework. Build a dedicated ink brush with its own pressure behavior, so your global curve stays comfortable for everything else.
- Work at a canvas size that survives downstream use. Hand-drawn assets often get scaled in After Effects, so start larger than you think you need.
- Export with transparency where it helps. Layered or transparent exports are easier to composite in After Effects, Nuke, or Blender than flattened images.
Using your Procreate drawings in an AI-assisted pipeline
Once your pressure feels right, your drawings can become more than static concept art. Styleframe is an AI video and motion tool built for artists who want control rather than a one-click black box. Every generation is driven by your own reference images, video clips, and keyframes.
That makes Procreate a natural source for the inputs:
- Frames-to-Video: draw a start frame and an end frame, then use them as keyframes to generate the motion between them.
- Restyle and Ink-and-Paint: use a reference image to carry a hand-drawn look, such as your own inked line quality, across footage or generated clips.
- 2D-to-3D and Turntable: turn a character or prop drawing into a 3D asset and generate a rotation view for review.
- Remove Background and 4K Upscale: isolate a subject, and bring finished output to production-ready 4K.
Iteration is non-destructive, so you can try several directions from the same sketch without losing earlier versions. Styleframe exports image sequences and sits alongside After Effects and Nuke, so you keep your compositing workflow. An After Effects plugin is on the way. The pressure-sensitive line work you tuned in Procreate remains the creative input, and the rest of your pipeline stays as it is.
Quick reference
Final tips
Start from the default and change one thing at a time. Add a single node, move it a little, and test on a scratch layer with slow strokes, fast strokes, and light and heavy touches. If the result feels worse, reset and try again. Once the global curve feels natural, leave it alone and do your fine-tuning per brush in Brush Studio. That keeps your whole brush library predictable while giving you the specific response you need for inking, shading, and texture work.