How to Add Watercolor Paper in Procreate
StyleFrame Team8 min read
To add watercolor paper in Procreate, import a paper texture image with Actions > Add > Insert a photo, move it above your artwork layers, and set its blend mode to Multiply. Then lower the opacity until the grain looks right. If you don't have a scan, you can paint a grainy texture layer with a textured brush and treat it the same way. Either method gives you a paper layer you can toggle, rescale, or recolor without touching the artwork underneath.
Why Watercolor Paper Texture Matters
Digital color tends to sit on a perfectly smooth surface, which is why even good watercolor-style work can read as flat. Cold-press paper has tooth that catches pigment, so washes settle into the valleys and leave lighter ridges. Adding that surface back is the quickest way to make a digital wash look physical.
There are two common approaches in Procreate:
- A texture layer on top of your art. This is the fastest and the most flexible, and it's what most artists mean by "adding paper."
- A texture inside the brush grain or canvas background. The texture then affects how each stroke lays down, which can look more convincing but is harder to change afterward.
Most of this article covers the layer method, then the alternatives.
What You Need Before You Start
- Procreate on iPad.
- A watercolor paper texture as a JPG, PNG, or similar image. This can be a scan of real paper, a photographed sheet under even light, or a downloaded texture from a brush or resource marketplace. Check the license, because many free textures are for personal use only.
- A canvas sized to match or be smaller than the texture. If your texture is smaller than your canvas, you'll need to tile it (covered below).
A high-resolution texture is a sensible target for a standard illustration canvas. Lower-resolution textures get soft when you scale them up, and the grain loses its crispness.
Method 1: Import a Paper Texture Image
Step 1: Insert the texture
Open your canvas, tap the wrench icon to open Actions, choose Add, then pick Insert a photo (or Insert a file if the texture is saved in Files). Select the texture. It lands on its own layer, usually in Transform mode.
Step 2: Fit it to the canvas
With the texture still selected, use the Transform tool (the arrow icon). Turn on Uniform so you don't distort the grain, then pinch or drag the corner handles until the image covers the whole canvas. If the edges don't reach, scale up slightly rather than stretching one axis.
You can also use the Magnetics or Snapping options to lock the corners to the canvas edge.
Step 3: Move it above your artwork
Drag the texture layer to the top of the stack. If it stays under your paint layers, you won't see it, because opaque paint covers the paper. That's the most common reason people think the texture "isn't working."
Step 4: Set the blend mode to Multiply
Tap the N next to the layer and choose Multiply. White areas of the texture disappear and the darker grain darkens the artwork beneath it. This is the closest digital match to pigment sitting on top of paper.
Try other modes for different results:
- Multiply: the standard choice for light paper with dark grain.
- Overlay or Soft Light: adds contrast to both the texture and the art, which suits more graphic work.
- Darken: keeps highlights cleaner, which can be good for pale washes.
Step 5: Adjust opacity
In the same layer menu, drag the opacity slider down until the grain supports the painting without muddying it. For soft florals and landscapes, a lower opacity is often enough. Heavy, rough paper for expressive work can go higher.
Method 2: Make Your Own Watercolor Paper in Procreate
If you don't want to rely on external textures, you can generate one in the app.
- Create a new layer and fill it with a light neutral, such as a pale gray or warm off-white.
- Choose a brush with visible grain. The built-in texture and sketching sets have options with a rough, noisy feel.
- Paint over the entire canvas using a slightly darker or lighter neutral so the grain is visible. Zooming out while you do this helps you cover the whole surface evenly.
- Add a second layer using a different grain brush and slightly different tone, painting loosely so the pattern isn't uniform.
- Soften any harsh clumps with the Smudge tool using a textured brush.
- Set the layer to Multiply and tune the opacity as in Method 1.
This won't match a scan of real cold-press paper, but it's quick and has no licensing issues. It also gives you a texture sized exactly to your canvas, so there's nothing to tile.
Controlling How the Paper Looks
Change the scale of the grain
Grain that's too fine reads as digital noise. Grain that's too coarse overpowers the artwork. Select the texture layer, open Transform, and scale it up or down until the tooth matches the paper type you're imitating. Keep Uniform on.
Make the texture stronger or subtler
Besides opacity, use Adjustments > Curves on the texture layer. Pulling the curve to increase contrast makes the paper rougher, and flattening it makes it quieter. This is more precise than opacity alone because you can affect highlights and shadows separately.
Change the paper color
Pure white paper isn't always the look you want. Add a new layer below your artwork, fill it with a cream or warm gray, and keep the texture layer on top in Multiply. Because the texture is separate, you can try several paper tints without redoing the texture.
Tile a texture that's too small
If the texture doesn't cover your canvas without being enlarged too far:
- Duplicate the texture layer.
- Use Transform with snapping to place the duplicate directly against the first.
- Repeat until the canvas is covered.
- Merge the texture layers.
This works best with seamless textures. With non-seamless ones, you'll see visible seams, so flip alternate tiles (Flip Horizontal or Flip Vertical in Transform) to hide the repetition.
Making the Texture Affect the Strokes, Not Just the Surface
A texture overlay sits on top of the whole picture, which means it looks the same over a heavy wash and over bare paper. Real watercolor doesn't behave like that: pigment pools in the grain. To get closer:
- Use the texture as a brush grain. In Brush Studio, the Grain settings let you import an image as the grain source. A brush using your paper as its grain deposits color unevenly in the same pattern as the paper.
- Clip a second texture layer to the paint. Place a duplicate of the texture in Multiply directly above a paint layer and use Clipping Mask so it only affects that layer. This gives you separate texture control over the wash versus the background.
- Keep one overall texture too. A light global layer ties everything together.
Saving and Reusing Your Setup
Once you've built a canvas you like, with the paper tint and the texture layer in place, go to the Gallery, swipe left on the canvas thumbnail, and tap Duplicate. Use the duplicate as a template for future pieces. Delete the artwork layers and keep the paper layers.
When you export, you have a choice. Export a flattened PNG or JPG with the paper included for a finished piece. Or export a layered file with the texture on its own layer if you want to adjust it later or turn it off for print or compositing.
Common Problems and Fixes
- Texture doesn't show: it's under your paint layers or still in Normal mode. Move it up and set it to Multiply.
- Artwork looks dull or gray: the texture opacity is too high, or the texture itself is too dark. Lower opacity or lighten it with Curves.
- Grain looks blurry: the texture was scaled up too far. Use a higher-resolution source.
- Visible seams: tiled copies don't align or the texture isn't seamless. Flip alternate tiles or switch to a larger texture.
- Texture prints on merchandise when you don't want it: keep it on a separate layer and hide it before export.
Taking the Paper Look Into Motion
For motion designers, a watercolor still is often the starting point rather than the deliverable. The same logic carries into After Effects: place a paper texture layer on top of your comp, set it to Multiply, and animate or hold it depending on whether you want a boiling grain or a static surface. Keeping the paper as its own layer in both Procreate and After Effects means you can match the look across stills and moving shots.
If you want to extend a painted look across video footage or animated sequences, is one option to explore.
However you generate the footage, you can still add your own paper overlay in the composite for final control. It's a way to extend a look you've designed by hand, not a one-click replacement for it.
Quick Recap
- Insert a paper texture with Actions > Add > Insert a photo.
- Scale it to cover the canvas with Uniform enabled.
- Place it above all artwork layers.
- Set the blend mode to Multiply.
- Tune opacity, scale, and Curves.
- Add a tinted paper layer underneath if you want a warmer sheet.
- Save the canvas as a template and export with the texture on a separate layer when you need flexibility.
Once the paper is a separate, adjustable layer, you can match any watercolor stock, from smooth hot-press to rough cold-press, without repainting a thing.