How to Add Symmetry Line in Procreate
StyleFrame Team7 min read
To add a symmetry line in Procreate, open Actions (the wrench icon), tap Canvas, turn on Drawing Guide, tap Edit Drawing Guide, and choose Symmetry from the bottom bar. A vertical guide appears by default, and you can switch it to horizontal, quadrant, or radial under Options. Tap Done, then make sure Drawing Assist is enabled on the layer you're drawing on, because the line only mirrors strokes on assisted layers.
Step-by-step: add a symmetry line in Procreate
These steps apply to Procreate on iPad. The menu labels differ slightly in Procreate Pocket on iPhone, covered in the next section.
- Open Actions. Tap the wrench icon in the top left of the canvas.
- Go to Canvas. In the Actions menu, select the Canvas tab.
- Turn on Drawing Guide. Flip the toggle. The default guide is a plain grid.
- Tap Edit Drawing Guide. This opens the Drawing Guides screen.
- Select Symmetry. The button sits at the bottom of the screen. Procreate starts you on a vertical guide through the middle of the canvas.
- Pick a mode under Options. Vertical, Horizontal, Quadrant, or Radial (described below).
- Tap Done. The guide is now active on the canvas.
- Enable Drawing Assist on your layer. Tap the layer in the Layers panel and choose Drawing Assist. The layer will show an "Assisted" label.
Start drawing on one side of the line, and Procreate reproduces each stroke on the other side in real time.
The step people miss: Drawing Assist per layer
The most common reason symmetry "doesn't work" is that the layer isn't assisted. Symmetry is tied to Drawing Assist, and each new layer starts without it. If you draw on a layer without the "Assisted" label, you'll get normal strokes with no mirroring.
Whenever you add a layer to a symmetrical piece, tap it and switch Drawing Assist on. The same guide settings you chose in the Symmetry panel then apply to that layer. You can also turn Drawing Assist off on a layer when you want to add asymmetrical details, such as a hand-drawn flaw or an off-center highlight, without disabling the guide for the whole canvas.
Adding a symmetry line in Procreate Pocket
On iPhone, the path is slightly different. Go to Modify, then Actions, then Guides, and tap Symmetry. To edit the guide, tap Guide Settings, which takes you to the same Drawing Guides screen as on iPad. The rest of the behavior is the same: vertical is the default and the nodes work identically.
Choose the right symmetry mode
Procreate offers four symmetry modes. Which one you pick depends on the shape you're building.
Vertical symmetry
A single guide runs top to bottom through the center. Whatever you draw on the left appears on the right, and vice versa. This suits faces, characters, logos, and anything bilaterally symmetrical.
Horizontal symmetry
A single guide runs left to right across the center. Strokes on the top half reflect onto the bottom half. It's good for reflections on water, or for shapes that need to mirror top to bottom. Heart shapes can be awkward here unless you rotate your drawing angle.
Quadrant symmetry
Vertical and horizontal guides cross to divide the canvas into four quadrants. A stroke in one quadrant is repeated in the other three. This is a quick way to build tile motifs, ornamental frames, and geometric patterns.
Radial symmetry
Procreate splits the canvas into eight segments using vertical, horizontal, and diagonal guides. Draw in one slice and the other seven fill in. This is the mode for mandalas, snowflakes, rosettes, and kaleidoscope-style graphics.
Radial mode is fixed at eight segments. Users on Procreate's feedback forum have asked for a configurable segment count, so you could choose, for example, three or five slices. Until that exists, you'll need a workaround for odd-numbered symmetry, such as building the motif in a motion tool afterward (see below).
Move, rotate, and reset the guide
You aren't locked to the dead center of the canvas. On the Drawing Guides screen you'll see two nodes:
- Blue (positional) node: drag it to move the whole guide across the canvas.
- Green (rotational) node: drag it to rotate the guide lines.
Moving and rotating a vertical or horizontal guide lets you mirror at an angle, which is useful for diagonal compositions or off-center mirror axes. To return to the default position, tap one of the nodes and then tap Reset.
Note that "vertical" and "horizontal" are effectively the same tool once you rotate the guide. The two options exist as quick presets for the two most common orientations.
Mirror vs. rotational symmetry
On the Drawing Guides screen there's a Rotational Symmetry toggle. By default, Procreate uses mirror symmetry, which reflects and flips your stroke across the guide. Rotational symmetry reflects and rotates the stroke, so the copy is flipped both horizontally and vertically at once.
The difference matters for non-symmetrical shapes. Draw a spiral or a letter with mirror symmetry and you get a reflected twin, like a butterfly wing. With rotational symmetry the copy looks like the original turned around the center point, which is closer to a pinwheel. Toggle between them and try a single curved stroke to see the difference quickly.
Make the guide easier to see
The guide lines can get lost behind busy artwork. On the same screen you can adjust:
- Color: use the hue bar at the top of the screen.
- Opacity: from invisible to fully opaque.
- Thickness: from invisible to noticeable.
Pick a color that contrasts with your palette, and lower the opacity once the composition is established. When you're finished adjusting, tap Done to commit, or Cancel to go back without changes.
Troubleshooting: why isn't my symmetry line working?
- Strokes aren't mirroring. Check that the active layer says "Assisted." If it doesn't, tap the layer and enable Drawing Assist.
- The guide isn't visible. Confirm Drawing Guide is toggled on under Actions → Canvas, and check that the guide's opacity and thickness aren't set to zero.
- The mirror is in the wrong place. Open Edit Drawing Guide, tap a node, and choose Reset. Then reposition with the blue node.
- Strokes mirror at the wrong angle. The green node may have rotated the guide. Reset it or drag it back.
- A new layer ignores the guide. This is expected. Drawing Assist is a per-layer setting, so enable it for each new layer.
A practical workflow: build symmetrical designs for repeat patterns
Symmetry is commonly used for surface patterns and ornamental elements. A typical approach is to set up a square canvas (some pattern designers like a 12 x 12 inch canvas at 300 dpi), turn on quadrant or radial symmetry, draw a motif on an assisted layer, and keep a plain background layer beneath it. From there you can duplicate and snap copies into a repeat tile. Keeping the motif on its own layer, separate from the background, makes recoloring or exporting with transparency much easier.
Taking symmetrical Procreate art into a motion pipeline
If you work in After Effects, Cinema 4D, Blender, or Nuke, Procreate is often a quick place to build a mandala, ornamental frame, logo mark, or pattern tile that you later animate. A few practical notes:
- Export a layered or transparent PNG. Keep the motif on its own layer so it's easy to isolate and animate in After Effects.
- Build large. If the artwork will be scaled in a 4K timeline, start with enough canvas resolution to avoid softness.
- Use motion tools for live symmetry. For symmetry beyond Procreate's eight-segment limit, some motion tools offer mirror or kaleidoscope-style effects, which let you animate the symmetry itself rather than baking it into a flat drawing.
Quick recap
- Actions → Canvas → Drawing Guide on → Edit Drawing Guide → Symmetry → Done.
- Choose Vertical, Horizontal, Quadrant, or Radial under Options.
- Turn on Drawing Assist for every layer you want to mirror.
- Use the blue node to move the guide, the green node to rotate it, and Reset to restore the default.
- Toggle Rotational Symmetry to switch between mirrored and rotated copies.
- For custom segment counts or animated symmetry, finish the effect in a motion tool.