How to Add Photoshop Brushes to Procreate
StyleFrame Team7 min read
Procreate can import Photoshop .abr brush files directly. Open the Brush Library, tap the + button in the top right, choose Import from Files, and select the .abr file. The brush lands in an Imported folder at the top of your library. Procreate runs its own brush engine, so only basic brushes tend to import in usable shape, while complex ones often lose pressure response, gradients, and texture behavior and need tweaking in Brush Studio.
What Transfers and What Doesn't
An .abr file is a Photoshop-specific format. Procreate reads it and maps Photoshop's brush settings onto its own equivalents, but the two engines don't behave identically.
In practice:
- Simple brushes (a basic tip shape, a soft round, a basic texture stamp) may import in somewhat usable shape.
- Complex brushes (layered dynamics, custom pressure curves, multi-tip textured media brushes) often import with a changed feel. Common symptoms are lost smooth gradients, a flatter pressure taper, and strokes that need several passes to leave a mark.
- Brush set organization may not survive. Sets organized specifically for Photoshop's desktop interface may not translate well.
- Tool presets and other Photoshop-only files are a different story. Procreate's documented import formats are
.brush,.brushset,.brushlibrary, and.abr, so don't expect other preset types to work.
Treat an imported .abr as a starting point. For motion work, where brush texture ends up on every frame of a hand-drawn sequence, it's worth testing before you commit to a look.
Method 1: Import from Files Inside Procreate
This is the most reliable route.
- Get the
.abrfile onto your iPad. Download it directly into the Files app, or move it over with iCloud or Dropbox. If it arrived as a ZIP, unzip it in Files first. - Open Procreate and tap the Brushes icon to open the Brush Library.
- Tap the + button in the top right of the library.
- Choose Import from Files and navigate to the
.abrfile. - Tap the file. Procreate processes it and adds the brush or brushes.
- Find the brushes. They appear in a folder named Imported at the top of your current brush library. If you imported a full set, it appears at the top of your current brush library.
Test the brush right away on a blank canvas before you assume anything is broken. Try light and heavy pressure, slow and fast strokes, and short and long strokes.
Method 2: Tap the File to Open It in Procreate
Procreate registers itself as a handler for brush files, so you can skip the library menu.
If an .abr file is sitting in an email or on a web page, tap it. You should see a prompt to import it into Procreate. Confirm, and the brush goes to the same Imported folder.
This is handy when a collaborator sends you a brush pack by email or a shared drive. You never need to open the Brush Library first.
Method 3: Drag and Drop
On iPad, you can also drag files straight into the app, which is useful in Split View.
- Open Procreate and the Files app side by side (or bring Files up over Procreate).
- Press and hold the
.abrfile until it lifts. - Drag it into Procreate and release.
To import several files at once, pick up one file, then tap additional files with your free hand to add them to the stack. Drag the whole stack in together. The same gesture works in reverse for exporting Procreate brushes to another app.
Fixing Brushes That Import Badly
If a brush feels wrong after import, you have two options: adjust it in Procreate's Brush Studio, or rebuild it from the shape.
Adjust the Imported Brush
Open the brush's settings by tapping it a second time in the library. Then check these areas, comparing against how the brush behaved in Photoshop:
- Stroke path: Spacing, jitter, and fall-off. A brush that needs many strokes to leave a mark may have settings that translated poorly.
- Pressure and taper: Procreate's Apple Pencil response curves are separate from Photoshop's. Adjust the pressure and taper settings until the stroke feels right at your normal drawing speed.
- Grain and texture: Check whether the texture is moving with the stroke or fixed to the canvas, and adjust scale and depth.
- Opacity and flow dynamics: These may play a part when grainy gradients go flat.
Make small changes and test after each one. Duplicate the brush before editing so you keep the untouched import for comparison.
Rebuild From the Brush Shape
When the import is too far off, the dependable workaround is to extract the tip shape and rebuild the brush using Procreate's dynamics.
- Option A: Export the shape as a PNG. Stamp the brush once on a transparent canvas in Photoshop and save it as a PNG. Bring the PNG into Procreate's Brush Studio as a shape source (or grain source), then set spacing, pressure, and jitter by hand.
- Option B: Use a brush viewer utility. Third-party desktop and mobile
.abrviewers can open a brush file and save the individual tip images as PNGs. This can help if you have a large set, though it's still a manual process.
You're recreating the behavior rather than converting it. The shape carries over, and the dynamics are yours to rebuild. For a brush you'll lean on across a long project, that's usually worth the time.
Check the License Before You Import
Photoshop brush packs are often sold with licenses limited to Adobe apps. At least one commercial brush maker states explicitly that its Photoshop brushes may be installed and used only in Photoshop and other Adobe software, and it offers separate Procreate versions of the same pack. It also declines to support its Photoshop brushes once imported elsewhere.
If you're doing client work, read the license, and if there's a Procreate edition of the pack, buy that. It has been built for Procreate's engine, so it will behave as designed without any conversion.
Troubleshooting Import Problems
- The import option doesn't show the file. Make sure it's actually an
.abrand not a ZIP or a renamed download. Unzip in Files first. - Procreate says nothing happened. Scroll to the top of the Brush Library and look for the Imported folder, or check the top of your current brush library for a new set.
- Only some brushes appear. Complex brushes may translate poorly.
- The brush feels weak or inconsistent. That's the engine mismatch. Tweak the settings or rebuild the brush from its shape.
- An older tutorial says it's not possible. Older forum threads predate native
.abrsupport. Current Procreate documentation lists.abras importable.
Using Procreate Artwork in a Motion Pipeline
Many motion designers and animators use Procreate for the hand-made layer: textured boards, painted elements, frame-by-frame animation, and style frames. Getting the right brush texture matters because it defines the look you'll carry through a whole piece.
A sensible handoff:
- Build your brush kit in Procreate, importing
.abrfiles where they work and rebuilding the rest. - Draw on separate layers, with a transparent background, so elements stay independent.
- Export layered files or PNG frames from Procreate and bring them into After Effects, Nuke, or Blender for compositing, camera moves, and finishing.
This is also where can fit as an optional step, using key frames you draw in Procreate with your tuned brushes as references. It doesn't replace your brushwork or your comp. It extends the drawings you've already made.
Quick Answers
Can Procreate open .abr files? Yes. Import them through the Brush Library, by tapping the file, or by dragging it in.
Where do imported brushes go? To an Imported folder at the top of your current brush library. An imported set appears at the top of your current brush library.
Why does my imported brush feel different? Procreate maps Photoshop settings to its own engine, and complex dynamics don't always translate. Adjust in Brush Studio or rebuild from the tip shape.
Is it okay to use purchased Photoshop brushes in Procreate? Check the license. Some packs restrict use to Adobe apps, and some creators sell a Procreate-specific version.
What if I need exact behavior? Use a native Procreate brush, or rebuild the brush in Brush Studio from the exported PNG shape.
The Takeaway
Importing is the easy part: + in the Brush Library, Import from Files, pick the .abr. The real work is verifying that the brush behaves the way you need, and rebuilding it from its shape when it doesn't. Test early, confirm the license, and once your brush kit is dialed in, move the artwork into your usual compositing pipeline.