How to Add Mirror Effect in Procreate
StyleFrame Team8 min read
Procreate gives you two ways to mirror artwork. The Symmetry drawing guide reflects strokes live as you draw (Actions → Canvas → Drawing Guide → Edit Drawing Guide → Symmetry), and the Transform tool lets you duplicate a layer and flip it horizontally or vertically. Use Symmetry for work in progress, such as faces, mandalas, and patterns. Use duplicate-and-flip for finished or imported artwork you want reflected once.
Which Procreate Mirror Method Should You Use?
The two methods solve different problems, so pick based on where the artwork is in its life.
Symmetry is non-committal until you draw, and it works per layer. Duplicate-and-flip produces a normal pixel layer you can nudge, mask, or recolor independently, which is usually what you want when handing files to an animation pipeline.
Method 1: Mirror While You Draw with the Symmetry Guide
Turn on the drawing guide
- Tap the Actions icon (the wrench).
- Open the Canvas tab.
- Toggle Drawing Guide on.
- Tap Edit Drawing Guide.
- Tap Symmetry at the bottom of the screen.
A vertical guide line appears down the middle of the canvas by default. Tap Done to commit. Anything you draw on one side of the line is reproduced on the other side in real time.
Make sure the layer is "Assisted"
This is the step that trips most people up. Symmetry only applies to layers with Drawing Assist enabled. Layers using it show the word "Assisted" under the layer name. If you draw on a layer and nothing mirrors, tap the layer and toggle Drawing Assist. New layers created after the guide is set up may not have it on, so check each one.
If you can't figure out how to turn symmetry off, go back to Actions → Canvas and switch the Drawing Guide toggle off, or disable Drawing Assist on the specific layer.
Choose a symmetry type
Inside Edit Drawing Guide → Symmetry → Options, you can pick from four modes:
- Vertical: a line down the center; left and right mirror each other. Good for faces, creatures, and front-facing logos.
- Horizontal: a line across the center; top and bottom mirror each other. Good for reflections in water or glass.
- Quadrant: vertical and horizontal guides together, so a stroke in one quadrant repeats in the other three.
- Radial: the canvas splits into eight segments using horizontal, vertical, and diagonal guides. A stroke in one segment repeats in all the others. This is the mode for mandalas and snowflake-style patterns.
Mirrored vs. Rotational symmetry
By default, Symmetry reflects strokes across the guide, flipping them. Switch on the Rotational Symmetry toggle and the stroke is reflected and rotated, so the copy is flipped on both axes at once. The visual difference is easy to miss until you draw an asymmetric shape, so test both with a quick squiggle before committing to a design.
Move and rotate the guide
The guide isn't locked to the center. Two nodes control it:
- The blue node moves the whole guide across the canvas.
- The green node rotates the guide lines, which lets you create mirrored results at an angle.
Tap either node and choose Reset to return the guide to its default position. This is useful for off-center compositions, like a character whose reflection axis isn't the canvas midline.
Adjust guide appearance
You can change the guide's color, opacity, and thickness at the top of the Drawing Guides screen. None of this affects your artwork. It only makes the guide easier to see against your palette.
Method 2: Duplicate and Flip a Layer
Use this when the artwork already exists, such as an imported vector, a scan, or a finished sketch.
- Import your file via Actions → Insert a File, or open the layer you've already drawn.
- In the Layers panel, swipe the layer left and tap Duplicate.
- With the duplicate selected, tap the Transform (arrow) tool.
- In the bottom toolbar, tap Flip Horizontal or Flip Vertical.
- Drag the flipped layer into position. Turn on Snapping so guides help you line it up.
- Tap the Transform icon again to deselect, then merge layers only if you're sure you won't need them separate.
Common mistake: flipping the whole canvas
If flipping one duplicated layer flips everything, you've used the canvas-level flip instead of the Transform tool's flip. The canvas flip affects all layers. It's useful as a check while drawing, because flipping the view reveals proportion errors, but it isn't how you mirror a single layer.
Mirroring a design and leaving a seam
For a clean joined mirror, position the original layer so its edge sits exactly on the center line, then flip the duplicate and snap it to the opposite side. If you see a hairline gap, nudge by a single pixel or use a slightly overlapping edge and mask it afterward.
Practical Tips for Cleaner Mirrored Artwork
- Draw the dominant side on purpose. Symmetry copies every stroke, including accidental ones. Work with a brush at a sensible size and undo often.
- Use separate layers for mirrored and non-mirrored elements. Turn Drawing Assist on for the symmetrical layers and off for hand-drawn asymmetrical details, like a scar, a stray hair, or a logo with a fixed reading direction.
- Check text and logos. Flipping reverses lettering. If you need legible text, add it after mirroring.
- Break perfect symmetry deliberately. Perfect mirrors read as artificial. A small offset, a mismatched highlight, or a different eye shape on one side often looks more natural.
- Build large canvases for animation. If the artwork is heading to a video pipeline, start at a canvas size that matches or exceeds your composition resolution, since mirroring doesn't add detail.
Taking Mirrored Procreate Art Into a Motion Pipeline
For motion designers, Procreate is often a source of hand-drawn assets rather than the final destination. A few notes for getting symmetrical artwork into After Effects, Premiere Pro, or Nuke:
- Export layered. Export your artwork as layered files so your compositing software can keep the layers intact. Keep mirrored halves on separate layers if you plan to animate them independently.
- Decide where to mirror. If the mirror is purely a compositing trick, it may be better to draw one half in Procreate and mirror it in your compositing software. This keeps the reflection live and adjustable.
- Use Procreate's Symmetry for details that need to be hand-drawn. Ornamental patterns, mandalas, and rotationally symmetrical designs are faster to draw with Radial Symmetry than to build with effects.
- Kaleidoscope looks. If you want an animated kaleidoscope rather than a static radial drawing, draw a single wedge or texture in Procreate, then apply a kaleidoscope effect in your compositing software so you can animate the source layer's position or rotation.
Where Styleframe Fits After the Mirror
Once you have symmetrical artwork, the next question is often how to move it, restyle it, or give it dimension without redrawing everything. is an AI video and motion tool built around artistic control rather than one-click output, and a few of its tools fit this kind of asset directly:
- Frames-to-Video: use your mirrored Procreate frames as keyframes and have the in-between motion generated from them, so the symmetrical design you drew is what the animation is anchored to.
- Restyle and Ink-and-Paint: drive a reference-based style transfer from your artwork or from a style reference, rather than describing a look in a text prompt. Useful for turning a clean symmetrical line drawing into painted, inked, or textured motion.
- 2D-to-3D and Turntable: take a mirrored character or object and explore it as a 3D form, which is a natural fit for symmetrical subjects.
- Remove Background and 4K Upscale: clean up an iPad export and bring it to production-ready 4K before it goes into a comp.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can step back to an earlier version without losing your work. Output exports as image sequences, so it slots into the compositing workflow you already use in After Effects or Nuke. Procreate stays your drawing tool, After Effects stays your compositor, and Styleframe handles the generative motion and style steps in between.
Troubleshooting Quick Reference
- Nothing mirrors when I draw: check that Drawing Guide is on and the active layer is marked Assisted.
- Mirror line isn't centered: open Edit Drawing Guide → Symmetry and tap Reset on a node.
- The mirror is flipped the wrong way for my design: try the Rotational Symmetry toggle.
- Flip affects the whole canvas: use Transform → Flip on the selected layer, not the canvas flip.
- Hairline gap in the middle: enable Snapping, or overlap the edges by a pixel and mask the seam.
- Can't turn symmetry off: switch off the Drawing Guide toggle, or disable Drawing Assist on the layer.
FAQ
Does Procreate have a mirror tool? Yes. It's the Symmetry option inside the Drawing Guide settings, plus Flip Horizontal and Flip Vertical in the Transform tool.
Can I mirror an existing drawing with the Symmetry tool? No. Symmetry mirrors new strokes as you draw. For existing artwork, duplicate the layer and flip it.
Can I mirror at an angle? Yes. Use the green rotational node to rotate the Vertical or Horizontal guide, then draw as usual.
What's the fastest way to mirror a finished design? Duplicate the layer, use Transform, and tap Flip Horizontal, then snap it into place.