How to Add Iphone Stickers to Procreate
StyleFrame Team8 min read
To add iPhone stickers to Procreate, lift the subject out of a photo in the Photos app, tap Copy (or Share > Save Image), then paste it into a Procreate canvas as a new layer. If your sticker lives on an iPhone and Procreate is on an iPad, use AirDrop, iCloud Photos, or Universal Clipboard to move it across. The sticker drawer itself has no dependable export button, so the practical route is to go back to the source photo and re-lift the subject.
What "iPhone stickers" actually means
Three different things get called iPhone stickers, and each is handled differently.
- Lifted-subject stickers (Live Stickers). You touch and hold a subject in a photo and iOS cuts it from the background. You can save it to the sticker drawer, copy it, or save it as an image. This is the one that works best with Procreate.
- Memoji and emoji stickers. These are Apple-generated artwork from the keyboard. They can be brought into Procreate, but check licensing before using Apple's character artwork in commercial work.
- Animated stickers. Live Photo stickers move on the iPhone, but Procreate treats imported stickers as still images, so expect a single frame unless you rebuild the motion yourself.
The steps below focus on the first type, since it gives you a clean cutout with transparency, which is what you want for compositing later.
Before you start
- Hardware and software. Subject lifting and the sticker drawer need a reasonably recent iPhone running an up-to-date version of iOS. Check Apple's support guide for supported models and versions. Procreate runs on iPad.
- Source resolution. The cutout can't be sharper than the photo it came from. Start with the original, uncompressed capture rather than a screenshot or a message attachment.
- Subject clarity. Lifting works best with a clear edge between subject and background. Hair, glass, and motion blur often leave rough edges that you'll clean up later.
Method 1: Copy and paste into Procreate
This is the fastest path when both apps are on the same device, or when Handoff is on.
- Open the photo in the Photos app.
- Touch and hold the subject until a shimmering outline appears, then lift your finger.
- Tap Copy in the menu that appears.
- Switch to Procreate and open your canvas.
- Tap Actions (the wrench icon) > Add > Paste. You can also swipe down with three fingers and tap Paste.
The subject lands on a new layer with its transparent background intact. Use the Transform tool to scale and position it.
Copying from iPhone to iPad
If the photo is on your iPhone and Procreate is on your iPad, Universal Clipboard can do this without a file transfer. Both devices need to be signed into the same Apple Account, with Wi-Fi, Bluetooth, and Handoff turned on, and they need to be near each other. Copy on the iPhone, then paste in Procreate on the iPad. If the paste doesn't show up, it's usually a Handoff or Bluetooth setting, or the clipboard timing out. Copy again and paste right away.
Method 2: Save as an image, then insert a file
Saving a file is more reliable than the clipboard if you want a permanent asset or you're batching several cutouts.
- In Photos, lift the subject as above.
- Tap Share and choose Save Image or Save to Files. Saving to Files gives you control over where the PNG ends up.
- In Procreate, tap Actions > Add > Insert a File (for Files) or Insert a Photo (for the Photos library).
- Select the cutout.
When it lands, check that the background is transparent, which shows as the checkerboard when you hide the canvas background color. If you see a flat white or black box, the file was flattened somewhere along the way. Go back and re-save from the lifted subject, not from a screenshot.
Moving files between devices
- AirDrop: Select the saved image on iPhone and send it to the iPad. Choose the Files destination, not Photos, if you want to keep the PNG intact.
- iCloud Photos: The cutout syncs to the iPad's Photos app automatically, and you can insert it with Insert a Photo.
- iCloud Drive: Saving to Files on iPhone puts the file where the iPad can reach it.
Method 3: Getting stickers out of the drawer
Stickers you've already added to the drawer are the awkward case. The drawer is built to place stickers in messages, notes, and other apps that support them, not to export files, and I wouldn't rely on drag-and-drop to Procreate working the same way across iOS versions. So the dependable method is to find the original photo and lift the subject again. Keep a habit of saving the cutout to Files at the moment you create the sticker, so you don't need to rebuild it later.
For emoji and Memoji, one workaround is the Procreate text tool, which accepts emoji from the system keyboard. Rasterize the text layer if you want to edit it as pixels. Another is to screenshot the artwork and cut it out again, though that costs resolution and the result will be soft at large sizes.
Clean up the sticker in Procreate
A raw iPhone cutout is a good starting point, not a finished asset. A few quick passes make it far more usable.
Fix edges
- Tap the layer to open the layer options, then choose Select to load a selection from the layer's shape. Use Feather or the eraser to soften or tighten the edge.
- Turn on Alpha Lock to paint inside the cutout without touching transparency. This is useful for fixing color fringing left from the old background.
- Use a small eraser on the layer to remove leftover pixels around hair or fine details.
Add a sticker outline
The classic sticker border is easy to add and works well for graphic or print uses:
- Duplicate the cutout layer and move the copy below the original.
- Turn on Alpha Lock for the lower copy and fill it with white (or your border color).
- Turn Alpha Lock off, then apply Gaussian Blur to the lower layer so it spreads outward.
- With the layer selected, use Selection in Automatic mode and tap to create a solid shape from the blurred area, then fill it. Adjust the blur amount to control the border thickness.
Match your canvas
If your project has a fixed size or DPI, put the sticker into a canvas set up for that from the beginning. Scaling a small cutout up inside Procreate won't add detail. For print, a common starting point is 300 PPI at the size you need, but your output spec comes first.
Getting the sticker into a motion pipeline
If you're taking stickers into After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, think about the handoff before you finish in Procreate.
- Export as PNG for a single flat asset with transparency. Hide the background color layer first, or the export will include it.
- Export as PSD if you want to keep the cutout, outline, and any paint layers separate in After Effects. Layer names and blend modes may not all translate cleanly, so check the result.
- Export as TIFF if your pipeline prefers it for stills.
- Procreate's animation assist can export animated files if you build frame-by-frame motion on the sticker, but treat that as a separate animation task rather than something the iPhone sticker provides.
In After Effects, set the PNG layer to the right color management for your project, and check the edge in a premultiplied versus straight alpha interpretation if you see a dark or light halo. Halos from lifted subjects are common, and a small matte choke usually clears them.
Where Styleframe fits in a sticker-based workflow
Lifted stickers and Procreate cutouts are static, and they're limited by the resolution of the photo you started from. If you're building motion work out of them, Styleframe, an AI video and motion tool, can sit beside Procreate and After Effects rather than replace either.
Treat any generated material as a plate or element to comp, and apply the same edge, color, and alpha checks you would use for any other asset.
Troubleshooting
- Paste is greyed out or does nothing. Copy again, then paste immediately. Confirm Handoff is on for both devices if you're crossing from iPhone to iPad.
- White or black box around the sticker. The image was flattened or screenshotted. Re-lift from the original photo and save it as an image.
- Jagged or blurry edges. The source photo is low resolution or the subject was cropped tightly. Use the original capture, and refine the edge with the eraser or a feathered selection.
- Color fringe on the edge. Turn on Alpha Lock and paint over the fringe with a nearby color from inside the subject, or choke the matte in your compositing app.
- The sticker is animated on the iPhone but static in Procreate. Procreate imports the still image, so rebuild the motion in Procreate's animation assist or in your motion software.
Quick checklist
- Lift the subject from the original photo in Photos.
- Copy it, or save it as an image or to Files.
- Paste or insert it into Procreate as a new layer.
- Confirm the background is transparent.
- Clean the edges and add an outline if you need one.
- Export PNG, PSD, or TIFF with the background hidden.
- Check edges and alpha when you bring it into After Effects or your compositor.
Once you have the copy-and-paste routine down, the process is quick. The time goes into edge cleanup and making sure the final file survives the trip into your motion pipeline.