How to Add Hard Edges to Your Painting in Procreate
StyleFrame Team9 min read
To add hard edges in Procreate, use a brush with a hard shape and no grain, set Streamline and pressure so strokes stay crisp, and shape the edges with a selection or a layer mask. For a brush with no soft falloff, load shape and grain images that contain only pure black and white pixels, and switch off the "filtered" options in Brush Studio. For edges on existing artwork, use a feather-free selection or a mask painted with a hard brush, so you can undo the change later.
Why Procreate edges look soft
Most "soft" edges come from three sources:
- Brush shape. Many default brushes use shape images with gray pixels or transparency gradients, so the edge fades instead of cutting off.
- Filtering. When the shape and grain "filtered" options are on, the textures are smoothed, which can add a slight blur to the stroke edge.
- Resampling. Scaling or rotating a layer with the Transform tool applies a blur (a bilinear filter) and softens previously crisp edges.
Even a nearly hard brush can show slight softness when you zoom in far. A little anti-aliasing is normal and often desirable, because it prevents jagged stair-stepping. A truly hard brush built from images with zero gray pixels removes it entirely. What you want is a clean one-pixel transition, not a gradient several pixels wide.
Method 1: Build a truly hard brush in Brush Studio
If you paint with hard-edged shapes, flats, or cel-style fills, a dedicated brush is the most reliable fix. Open Brush Studio by tapping a brush, or duplicate a simple one so you don't overwrite a favorite.
- Shape source. Import a shape image that contains only pure white and pure black, with no gray pixels. A solid circle made in an image editor with the pencil or a threshold applied works well. The shapes in Procreate's built-in library often contain gray or transparent pixels, so a custom image gives a cleaner edge.
- Grain source. Use a blank grain, or a custom grain made the same way, with no gray values.
- Filtering. Set both the shape and grain to unfiltered, so Procreate doesn't smooth the textures.
- Stroke properties. Lower Streamline if you want exact control, or raise it for smooth, clean curves. Set spacing low enough that the stroke forms a continuous edge rather than visible stamps.
- Apple Pencil. Reduce pressure-driven opacity and size changes. A flatting brush should behave consistently, with the same edge at any pressure.
- Test. Paint a patch of white on a dark layer, zoom in far, and check the edge. If you still see a visible gradient, the shape or grain image likely contains gray pixels.
To harden a brush you downloaded from another artist, you may need to unpack its shape image and apply a threshold in an image editor. A threshold at 50% (128) converts everything to black or white. Then repackage the brush and re-import it. This only works for brushes that ship their own shape file, not for ones that reference Procreate's internal library.
Brush dispersion can add irregular, ink-bleed edges to a hard brush without softening it. Try small values.
Method 2: Use selections for hard-edged shapes
A selection is often faster than a brush when you want geometric or controlled edges.
- Use Freehand for custom shapes, Rectangle or Ellipse for geometry, and Automatic to select regions of similar color.
- Make sure Feather is off. Feathering softens the selection boundary and is a common cause of fuzzy fills.
- Fill the selection with ColorDrop, or drag the color swatch into it.
- For Automatic selections, adjust the selection threshold so it hugs the shape. A low threshold can leave a halo of unselected anti-aliased pixels, so add the Add option or a small amount of expansion.
Selections are best for flat color areas, backgrounds, and shapes you intend to animate separately.
Method 3: Layer masks and clipping masks
When you want to cut into existing painted artwork without losing pixels, use masks rather than the eraser.
- Tap the layer and choose Mask.
- Select the mask thumbnail, then paint with black to hide and white to reveal.
- Use your hard brush or a selection fill to define the boundary.
Because the original pixels remain, you can reverse any mistake by painting white back in. This matters for production work, where a client may ask for a different crop or silhouette.
Clipping masks are useful for texture and shading. Place a layer above your base shape, choose Clipping Mask, and anything you paint is limited to the base layer's edge. A single hard edge on the base layer controls the whole stack, so painterly shading stays inside a crisp silhouette.
Method 4: Harden an edge that is already soft
If you inherit a soft-edged shape, you have a few options:
- Redraw the edge on a mask. Put a mask on the layer and trace the boundary with a hard brush. This is the cleanest approach and keeps the original.
- Use a selection. Select the area with Automatic or Freehand, invert if needed, and fill or delete on a new layer.
- Steepen the curve. On a grayscale layer or mask, an Adjustments > Curves move that makes the midtones very steep pushes values toward black and white and tightens the transition. It's a rough substitute for a threshold, so check the result at full zoom.
Avoid blur-then-sharpen strategies. Sharpening a blurred edge does not recover a crisp one; it usually produces ringing and noise.
Hard edges versus natural edges
Not every painting needs razor edges. For gouache, cut paper, or watercolor looks, a deckled or torn-edge brush can give the boundary character while keeping it well-defined. The reliable way to use these brushes is on a layer mask: paint black to hide the outer area, switch to white to restore anything you removed by mistake. Larger brush sizes give a bigger torn look, and smaller sizes stamped repeatedly along the edge give more subtle variation. A separate corner brush is useful for rounding corners.
A good rule is to decide edge quality by purpose. Use hard edges for graphic shapes, mattes, and anything that will be keyed or tracked. Use textured edges for hand-made character.
Don't soften edges in Transform or export
Resizing a layer can undo your work. When you use Transform, check the interpolation setting. Bilinear smooths pixels; a Nearest Neighbor option, where your version offers it, preserves hard pixel edges, which is useful for pixel art or very crisp scaling. Availability varies by Procreate version, so check the Transform menu in yours.
A few other habits help:
- Paint at the final size or larger. Starting at a higher canvas resolution gives you more room to scale down without blurring.
- Avoid repeated rotation. Each rotate or scale resamples the layer. Do it once, or redraw the element.
- Export PNG or PSD for transparency. PNG preserves alpha, and PSD keeps layers for compositing. Check the exported edges at 100% and 200% zoom before sending files downstream.
Taking hard-edged paintings into After Effects
If your Procreate artwork will be animated, edge quality needs to survive compositing.
- Export layers separately. Export as PSD or as individual PNGs so characters, props, and backgrounds move independently.
- Mind the alpha. Dark or light fringes around edges often come from a premultiplied versus straight alpha mismatch. In After Effects, right-click the footage, choose Interpret Footage > Main, and test straight versus premultiplied settings if you see a halo.
- Build large. Raster layers soften when scaled up in After Effects. Export at a higher resolution than the comp requires so you can push in on a camera move.
- Keep color consistent. Check that the canvas color profile in Procreate matches your project's working space, so edge pixels don't shift when composited.
- Use mattes sparingly. If the painting needs a separate matte, make it from a duplicate silhouette layer filled with pure black and white and exported alongside the color.
Where Styleframe fits
Hard-edged Procreate paintings often serve as the starting look for a larger sequence, such as a styleframe, a board, or a key pose. is an AI video and motion tool built for artistic control. It works from your own reference images, video clips, and keyframes rather than a single prompt. You can place your painted frames as keyframes in Frames-to-Video to generate the motion between them, or use Restyle and Ink-and-Paint to carry the look of your painting onto other footage or frames. Remove Background can help isolate elements, and 4K Upscale prepares output for finishing.
Iteration is non-destructive, so you can compare versions without overwriting earlier ones. Styleframe exports image sequences, so the results go into your existing After Effects or Nuke comp. Your painting stays the creative source, and compositing stays where you already do it. As with any generative step, inspect edges at full resolution and fix problem frames in your comp or in Procreate.
Quick checklist
- Use a hard brush with clean black-and-white shape and grain, with filtering off.
- Turn Feather off on selections.
- Cut edges with masks, not the eraser.
- Use clipping masks to keep shading inside crisp silhouettes.
- Check Transform interpolation, and avoid repeated scaling and rotation.
- Export with alpha at a larger size than you need, then confirm edges in After Effects.
FAQ
Why does my hard brush still look slightly soft when zoomed in? Anti-aliasing adds a thin transition at the edge. If the softness is wider than a pixel or two, check for gray pixels in the shape and grain images and turn off filtering.
Can I make hard edges without a custom brush? Yes. Use a selection with feather off and fill it, or paint a layer mask with a simple hard brush.
Is the eraser or a mask better for cutting edges? A mask. It keeps the original pixels, so you can restore or adjust the edge later.
Why do my edges look different in After Effects? The usual causes are alpha interpretation, color profile mismatch, or scaling a raster layer past its native resolution. Check each in that order.