How to Add Hard Edges in Procreate
StyleFrame Team8 min read
To add hard edges in Procreate, start with a brush that has no softness in its shape or grain, such as a monoline or technical pen. Then turn off shape and grain filtering in Brush Studio, and keep feathering off when you make selections and fills. For a truly hard edge, build a custom brush from a shape image that contains only pure black and pure white pixels. Finally, avoid anything that resamples the layer afterward, such as scaling with a smoothing interpolation.
What "Hard Edge" Means in Procreate
Edge quality comes from several places, and a soft edge can enter at any of them:
- The brush: the shape and grain images used to build each dab.
- Selections and fills: feathering, ColorDrop thresholds, and masks.
- Transforms and resizing: interpolation softens pixels every time you scale or rotate.
- Export: canvas size and how you scale the file afterward.
Fix the brush first, since it causes most of the problems. Then check the other three.
Method 1: Start With a Naturally Hard Brush
The quickest route is a brush that is already fairly crisp. Look for a monoline or technical-pen style brush in the Brush Library.
- Open the Brush Library and pick a monoline or technical-pen style brush.
- Swipe left on it and choose Duplicate, so the original stays intact.
- Tap the duplicate to open Brush Studio.
- Check Properties for the maximum and minimum brush size, and check Apple Pencil for how much pressure changes opacity and size.
- Paint a test stroke and zoom in far enough to see individual pixels.
Pressure can make a hard brush look soft. If opacity drops at light pressure, the stroke will have partially transparent pixels, so reduce or remove the pressure-to-opacity response for flat, graphic work.
Method 2: Build a Truly Hard Brush in Brush Studio
Even good ink brushes can show slight softness at high zoom. Procreate's built-in shape and grain images contain gray pixels, which is why the edges don't look perfectly crisp. For production work on flat graphics, cel-style fills, or masks, build your own.
Create a binary shape image
- In any image editor, make a square canvas, for example 1024 × 1024 pixels.
- Draw a filled circle (or whatever dab shape you want) in pure white on pure black, using a pixel or pencil tool with anti-aliasing off.
- If you start from an existing image, apply a Threshold adjustment (a midpoint around 128 works) so every pixel is either black or white.
- Save it as a PNG and import it into Procreate.
Assign it in Brush Studio
- Duplicate a simple brush, then open Shape in Brush Studio.
- Tap Edit on the shape source and import your PNG from Photos or Files.
- Turn shape filtering off. Depending on your Procreate version, this is a toggle or a filtering option. Leaving it on blurs the shape on the way to the canvas.
- Open Grain and set it to none (or use a grain with no gray pixels, if you want texture that stays crisp).
- Under Rendering, keep the blend mode simple.
- Paint a test, zoom in, and look for stray gray pixels along the edge.
To get an irregular but still hard edge, such as a rough ink look, edit the shape PNG itself with a pixel tool. You can also add a little brush dispersion in Brush Studio. Irregularity then comes from the shape, not from softness.
Method 3: Use Stabilization Without Rounding Your Corners
Hard edges are about shape as well as pixels. Stabilization and StreamLine smooth strokes, but heavy settings round off corners.
- Global stabilization is under Actions > Prefs > Pressure & Smoothing. It affects every brush, so keep it low and turn it back down after a task.
- Brush stabilization is in the Stabilization tab of Brush Studio. Stabilization amount smooths and straightens the stroke, and StreamLine reduces wobble.
For angular, graphic shapes, lower both. For long, clean curves, raise StreamLine first.
Method 4: Make Crisp Selections and Fills
A hard-edged brush doesn't help if your fills go through a soft path. For flat color, selections often beat painting.
- Use the Selection tool in Freehand, Rectangle, or Ellipse mode to define the area.
- Leave Feather off. Feathering is the main source of soft selection edges.
- Fill with the layer fill or ColorDrop. Drag the color into the selection, or choose Fill Layer from the layer menu.
- Use Clipping Masks or Alpha Lock to keep color inside existing shapes without painting over the boundaries.
For ColorDrop on line art, the threshold setting affects how the fill meets anti-aliased lines. Adjust it while the fill is active and zoom in before you commit. If you see a halo, fill the shape on a layer beneath the line art, or expand the selection by a pixel and put the fill under the lines.
Method 5: Stop Softening Edges After You Draw Them
Once you have hard pixels, protect them.
- Transforms: scaling or rotating with the Transform tool applies a smoothing (bilinear) filter that blurs the edge. Users have requested a nearest-neighbor option for transforms, so redraw instead of scaling, or avoid arbitrary rotation.
- Canvas size: a higher-resolution canvas makes aliasing less noticeable. Draw large, then downscale in your compositor.
- Layer effects: Gaussian Blur, Motion Blur, Sharpen, and Liquify all change edge pixels. Apply them on duplicates, not on your clean art.
- Export format: use PNG for transparency. JPEG compression adds ringing around hard edges.
Handing Hard-Edged Art Off to After Effects
Procreate output behaves differently once it enters a motion pipeline, so a few habits help.
- Export at 2× or more of your delivery resolution when you plan to scale or animate the layer. Downscaling in After Effects produces clean anti-aliasing, while upscaling a low-resolution PNG gives soft edges.
- Check the alpha interpretation if you see dark or light fringes around shapes on transparency. Right-click the footage in After Effects, choose Interpret Footage > Main, and test straight versus premultiplied.
- Use Minimax or Matte Choker to tighten edge fringes without repainting.
- Keep hard-edged art on its own layers. Separate line art, flats, and shadows so you can animate and composite them independently.
- Set the layer's quality to Best and use continuous rasterization where it applies, so scaled layers don't lose crispness.
If the final look is pure vector-style geometry, consider rebuilding the shapes as shape layers in After Effects. Procreate is a raster tool, and raster edges will always be limited by pixel resolution.
Where Styleframe Fits for Hard-Edged Motion Work
Hard edges in Procreate often serve a larger goal, such as a cel-shaded, inked, or graphic look that carries into motion. This is where can help. It's an AI video and motion tool built for professional artistic control, not a one-click generator.
A practical workflow looks like this:
- Draw your hero frames in Procreate with the hard-edged brushes above. These become your keyframes and style references.
- Use Frames-to-Video to generate motion between keyframes that you control, instead of leaving the whole shot to a prompt.
- Use Restyle or Ink-and-Paint, which are reference-driven style transfers, to carry your hard-edged look onto video clips or other footage. Your drawing sets the target, and it works from the reference you supply.
- Use Remove Background to isolate subjects, 2D-to-3D or Turntable when you need dimensional views of a character, and 4K Upscale to reach production-ready resolution.
- Export an image sequence and bring it into After Effects or Nuke for compositing, edge cleanup, and grading.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can refine one pass without losing earlier work. Edge crispness in generated output still depends on your references and settings, so check the result at 100% zoom as you would with any raster source. The image sequence export fits into your existing compositing pipeline.
Quick Troubleshooting
- Edges look fuzzy at high zoom: the brush shape or grain has gray pixels, or filtering is still on. Rebuild the shape as pure black and white.
- Lines have light halos after a fill: adjust the ColorDrop threshold, or place the fill on a layer beneath the line art.
- Strokes feel laggy or rounded: global stabilization is probably still turned up.
- Art looks soft after resizing: the Transform tool applied smoothing. Redraw at size instead of scaling.
- Fringes in After Effects: reinterpret the alpha channel, or use Matte Choker.
- Opacity varies in a stroke: reduce pressure-to-opacity in the Apple Pencil tab.
Final Checklist
- Duplicate a clean brush and leave the original alone.
- Use a binary shape and turn off shape and grain filtering.
- Keep pressure from lowering opacity on graphic work.
- Keep Feather off for selections and fills.
- Avoid blur, liquify, and smooth scaling after the art is finished.
- Export PNGs large, check alpha in After Effects, and downscale there.
With these settings in place, Procreate can produce crisp, clean edges that hold up in motion, whether you finish them in After Effects, Nuke, or a style-transfer pass in Styleframe.