How to Add Grain Effect in Procreate
StyleFrame Team8 min read
To add grain in Procreate, tap Adjustments → Noise, slide on the canvas to set the amount, and choose Single (monochrome) or Multi (color) noise. For non-destructive control, apply Noise to its own layer filled with mid-gray, then set that layer to Overlay or Soft Light and lower its opacity. Grain brushes and imported texture layers are the other two common routes. Procreate's grain is baked into pixels, so if the artwork is headed into motion, you will usually get better results by exporting clean art and adding animated grain in After Effects or Nuke.
Method 1: Use the Noise Adjustment
Noise is Procreate's built-in grain generator. It randomizes the brightness and color of pixels on the active layer, and it is the fastest way to get an analog texture.
Step-by-step
- Select the layer you want to affect. Adjustments act on one layer at a time, so a flattened copy or a grouped-and-merged duplicate is the usual target for whole-image grain.
- Tap the Adjustments icon and choose Noise.
- Slide your finger left or right on the canvas. The bar at the top shows the Noise percentage, which starts at 0%.
- Pick a Noise Style, set Scale, Octaves, and Turbulence, then choose a Channel mode.
- Commit by tapping the Adjustments icon again. To apply and keep working inside Noise, tap the canvas to bring up Adjustment Actions and choose Apply.
What each control does
- Clouds, Billows, Ridges: These are the three Noise Styles. Clouds is the coarsest and looks cloud-like at large scales. Billows adds finer detail and texture. Ridges is the most detailed, with harder edges that can resemble light on water. For film-style grain, Clouds is usually the safest base because the other two read as texture patterns at larger scales.
- Scale: Controls the size of the noise. Low values give a fine, film-like grain. Higher values give a mottled, paper or cloud look.
- Octaves: Adds complexity and detail. Raise it when the grain looks too smooth or uniform.
- Turbulence: Twists and warps the noise pattern. Keep it low for photographic grain and push it up only for stylized texture.
- Single vs. Multi: Single produces monochromatic black-and-white noise, which mimics luminance grain. Multi produces colored noise, closer to digital sensor noise or chroma speckle.
- Additive: With Additive on, the noise is transparent, so your image remains visible even at 100%. With it off, the noise is opaque and will completely obscure the image at 100%.
For a first pass at a film look, try Single, Additive on, a low Scale, and a modest percentage. Overdoing the amount is the most common reason Procreate grain looks cheap.
Method 2: Put Grain on Its Own Layer
Applying Noise directly to your artwork is destructive. A dedicated grain layer lets you adjust strength, blend, and visibility at any point, including after a client asks for "a bit less."
- Add a new layer above your artwork.
- Fill it with mid-gray. Drag a gray swatch from the color panel onto the layer, or use Color Fill.
- With that layer active, open Adjustments → Noise and set Single, a small Scale, and the amount you want. Apply it.
- Tap the layer's N to open blend modes and choose Overlay or Soft Light. The gray drops out and the grain modulates the image underneath.
- Lower the layer opacity until the grain sits where you want it.
Overlay gives a punchier, higher-contrast grain. Soft Light is gentler and tends to look more like film. Multiply or Screen can work for dark-only or light-only grain, but they shift overall tonality, so check the result against your original.
If the grain feels too crisp or digital, apply a small Gaussian Blur to the grain layer. Even a tiny blur softens the pixel-level edges and reads closer to emulsion grain. Because the grain is separate, you can change the blur later or hide the layer entirely.
Method 3: Grain Brushes and Shader Brushes
Noise is global. Brushes let you place grain selectively, which suits illustration, lettering, and shading work where texture should follow form rather than cover everything.
Using existing grain brushes
Open the brush library and pick a brush with a fine sandy grain for subtle texture, or a chunkier one for a bolder effect. Free and paid grain brush packs are widely available, including film grain sets for Procreate 5 or later on iPad. Work on a dedicated layer above your base color so you can adjust it later. Build texture gradually with a light touch, since adding more is easier than removing it. Lower brush opacity gives softer texture, and higher opacity gives a more pronounced one.
Building a simple grain shader brush
If you want a brush that stipples grain into shadows, you can make one yourself:
- Create a square canvas with a pure black background.
- Using a stipple brush in pure white, scatter dots across the canvas with even spacing and keep them inside the edges.
- Copy the canvas (three-finger swipe down, Copy All).
- In the brush library, tap + to make a new brush. Under Shape, edit the Shape Source and import the pasted image.
- Set Stroke Path spacing to roughly 40%, Scatter to around 125%, and Rotation to Follow Stroke.
- Set Rendering Mode to Uniform Blending, and turn off Apple Pencil pressure opacity so the grain stays consistent.
- Raise Shape Behavior Count if you want denser grain, and adjust maximum brush size to suit your canvas.
These values are starting points. Tune them against your canvas resolution, since grain density is tied to pixel size.
Method 4: Import a Real Film Grain Texture
If you want photographic grain rather than procedural noise, drop in a scan or stock grain image.
- Insert the image through Actions → Add → Insert a Photo.
- Scale it to fill the canvas. Avoid upscaling a small grain plate, because enlarging grain changes its character.
- Set the layer to Overlay, Soft Light, or Screen depending on whether the plate is gray, neutral, or black-based.
- Reduce opacity until it blends in.
This approach looks more organic than generated noise, but it is a fixed image. Repeating the same plate across multiple frames will produce visible pattern repetition in animation.
Making Grain Look Like Film, Not Static
A few habits separate convincing grain from obvious digital noise:
- Match grain to resolution. Grain applied on a small canvas and then upscaled becomes blobby. Add grain at your final output size.
- Use Single for luminance grain unless you specifically want colored noise.
- Keep it subtle. Grain should be felt before it is seen, especially on gradients and shadows.
- Soften slightly. A small blur removes the razor-sharp pixel look.
- Check at 100%. Zoomed-out previews hide or exaggerate grain. Judge it at actual pixels.
- Apply grain last. Do it after color grading and effects so the texture is not altered by later adjustments.
When Grain Is Headed for Motion
This is where Procreate's approach stops being enough for many motion workflows. A grain layer in Procreate is static, and film grain is anything but. In a moving sequence, each frame needs a different grain pattern. A frozen texture sitting on top of animated art reads as a dirty window, not film.
You have two practical options:
- Finish grain in the compositing app. Export clean artwork from Procreate, ideally as layered PSD or flattened PNG at final resolution, and add grain in After Effects (using its grain effects or a noise-based layer with blend modes) or Nuke (using a grain node). This keeps grain animated, adjustable, and consistent across a whole edit.
- Use Procreate grain as a look reference. If a client approves a texture in a still frame, match it in the comp rather than trying to bake it into every frame.
If you must bake grain into frames from Procreate, generate a different grain layer per frame rather than copying one, and expect that the process will be slow and hard to revise.
Where Styleframe Fits
Styleframe is an AI video and motion tool built for artists who want control over the result. It does not replace Procreate's Noise adjustment or your compositing grain pass, but it may help when a grainy, textured illustration needs to become moving footage.
Once you have a textured still from Procreate, you can use it as a reference in Styleframe, so the grain, line quality, and palette from your frame can guide the look. It is meant to fit an existing pipeline rather than replace it, so you can still add or refine animated grain, color, and finishing in your compositing app.
Quick Reference
Final Notes
Procreate gives you several workable ways to add grain. Noise is quick, a gray-filled layer makes it reversible, brushes give you local control, and imported plates add realism. Choose based on whether the piece stays a still or becomes motion. For stills, keep the grain on its own layer and apply it last. For anything that moves, treat Procreate's grain as a design reference and rebuild it in your compositor, where it can change every frame.