How to Add Eyelashes on Procreate
StyleFrame Team8 min read
To add eyelashes in Procreate, make a new layer above the eye, choose a tapered brush such as a pencil or fine liner, and flick short curved strokes outward from the lash line, varying length and angle. Build the lashes in layers, with shorter, less curved lashes at the inner corner and longer, more curved ones at the outer corner. Then add a darker tone at the roots, a few highlights at the tips, and a few stray lashes to break up the uniformity. If you need lashes repeatedly, you can turn one hand-drawn lash into a custom stamp brush.
The steps below cover the drawing workflow and a stamp-brush shortcut. They also cover keeping the lashes on separate layers so they stay useful once you take the artwork into an animation or compositing pipeline.
Before you start: set up the canvas for lashes
Lashes are small, fine details, so a little setup saves a lot of cleanup later.
- Work at a resolution that holds up. If the artwork will be animated, composited, or upscaled, draw at the largest canvas your device can handle. Thin strokes alias quickly on small canvases.
- Keep lashes on their own layers. Put upper lashes, lower lashes, and shading on separate layers above the eye. This makes edits non-destructive and lets you move or hide the lashes later.
- Zoom in. Work at 200–300% so you can control each stroke, then zoom out regularly to judge the overall shape.
Step 1: Choose a brush that tapers
You don't need a dedicated eyelash brush. Many artists simply use a pencil or inking brush with a tapered end, medium opacity, and a quick flicking motion. The default Procreate libraries already include good options, such as a fine liner, a tapered brush, or a pencil brush.
What matters is that each stroke starts thick at the root and ends in a fine point, like a thin curved cone. If your brush doesn't do that:
- Open Brush Studio by tapping the brush in the Brush Library.
- Go to Taper and increase the end taper so the stroke narrows at the tip. Raise the start taper if the root should also feel soft.
- Under Apple Pencil or Pressure, make sure size responds to pressure so lighter flicks produce thinner lashes.
- Check the Stabilization settings under Stroke path. Too much smoothing makes fast flicks wobble, so reduce it for lashes.
Test the brush on a blank layer before committing. Draw a dozen flicks at different speeds and pressures and see whether they taper cleanly.
Step 2: Establish the lash line
Lashes grow from the edge of the eyelid, so the lash line is your guide.
- Create a new layer above your eye artwork and name it "Lash guide."
- Lightly sketch the curve of the upper lid in a contrasting color at low opacity.
- Do the same for the lower lid, which is usually flatter.
- Reduce this layer's opacity once the lashes are drawn, or delete it.
If your eyes are symmetrical, you can use Drawing Guide → Symmetry while sketching the lid, but don't draw the lashes themselves with symmetry on. Mirrored lashes look artificial.
Step 3: Draw the upper lashes
Pick a dark color that isn't pure black. A very dark brown, a deep blue-black, or a dark shade sampled from the hair or shadow areas usually looks more natural.
- Start at the inner corner. Draw short lashes with little curvature.
- Flick outward from the lid. Start each stroke on the lash line and move away from it in one confident motion. Slow, hesitant strokes lose the taper.
- Increase length and curve as you move outward. Lashes get longer and more curved toward the outer part of the upper lid.
- Vary spacing and direction. Real lashes clump, cross, and fan out. Avoid evenly spaced strokes.
- Rotate the canvas. Turn it with two fingers so every stroke follows your hand's natural arc. Drawing lashes against your wrist's motion can lead to stiff results.
Once you have a first pass, add a second layer of lashes slightly behind or above the first, particularly near the outer corner. This creates volume and depth.
Step 4: Add the lower lashes
Lower lashes are shorter, finer, and sparser.
- Use a smaller brush size and lighter pressure.
- Space them more evenly and curve them less.
- Lower the layer's opacity slightly so the lower lashes recede behind the upper ones.
Keep them on their own layer so you can adjust their strength without affecting the upper set.
Step 5: Add depth with shading and highlights
Flat black strokes read as drawn lines. A few small adjustments make them read as lashes.
- Shade the roots. On a layer clipped to your lashes (use Clipping Mask), paint a slightly darker tone at the base. This suggests thickness.
- Highlight the tips. On a new layer, add tiny lighter touches on a handful of lash tips where light would catch them. Keep it subtle.
- Add a contact shadow. Set a new layer to Multiply, paint a soft shadow under the lashes on the eyelid or eyeball, and soften it with a light Gaussian Blur. This anchors the lashes to the face.
- Introduce stray lashes. Add a few slightly out-of-place lashes at the edges. They break up the pattern and add character.
Step 6: Fix and refine
Step back and look at the whole eye.
- Use Liquify (Adjustments → Liquify) with a small brush and low pressure to nudge lashes into better curves.
- Use the Transform tool with Warp to bend an entire cluster if the curve feels off.
- Erase stray marks with a hard eraser at small size, and thin overly thick lashes by painting skin tones over their bases on a layer beneath the lashes.
- Duplicate a lash layer, flip it horizontally to place it on the other eye, then edit it manually so the two sides are not identical.
Optional: Make a reusable eyelash stamp brush
If you draw lashes often or need many consistent lashes, a stamp brush speeds things up. The tradeoff is that stamped lashes can look repetitive unless you resize, rotate, and merge them individually.
- Draw one clean, tapered, curved lash in black on a white canvas. A tight cluster of three also works.
- Select and copy it.
- Create a new brush in the Brush Library with the plus icon.
- In Shape, tap Edit, then Import → Paste, and invert it if needed so the lash shows as the shape.
- Raise Spacing under Stroke path so each tap makes a discrete stamp rather than a continuous line.
- Add a little Rotation jitter and Size jitter under Properties to reduce repetition.
- Stamp on a separate layer, then use Transform to resize and rotate each lash set, merging when you're satisfied.
The simplest rule is to stamp for the base structure and hand-draw for finishing. Stamps give you consistency and hand-drawn strokes give you believability.
Adding lashes to an existing portrait or photo
If you're painting over a photo or an existing character, the process is the same, with a few additions:
- Sample colors directly from the image with the color picker so the lashes match its lighting.
- Match the direction of the existing lashes before adding new ones.
- Keep your lashes on a separate layer so you can compare with and without.
- If the source is lit from one side, make the highlights and contact shadow follow that direction.
Taking lashes into an animation or compositing pipeline
For motion designers and animators, the more useful question is often what happens after the lashes are drawn. A few habits make Procreate artwork much easier to use in other animation and compositing software.
- Name and separate layers. Eye, iris, upper lashes, lower lashes, shadow, and highlights should each have their own layer. A layered export keeps them editable for rigging or parallax.
- Keep a clean alpha. Hide the background layer and export with transparency so the lashes sit cleanly over other plates.
- Draw key poses. For a blink, draw an open, half-closed, and closed pose, with the lashes redrawn or warped for each. Lashes bunch together and change direction as the lid closes, so scaling the open set rarely works.
Common mistakes to avoid
- Uniform strokes. Identical length, thickness, and spacing look mechanical.
- Pure black everywhere. Slightly warm or cool darks look more natural.
- Lashes that start away from the lid. Roots should sit on the lash line.
- Too many lashes. Overly dense lashes can swallow the eye. Start sparse and add.
- Ignoring perspective. In three-quarter views, lashes on the far eye are shorter and more foreshortened.
- Flattening too early. Merge layers only when you're certain you're done.
Quick workflow summary
- Set up a high-resolution canvas and separate layers.
- Choose a tapered pencil or inking brush and tune its Taper settings.
- Sketch the lash line.
- Flick upper lashes outward, short at the inner corner and longer at the outer.
- Add finer, sparser lower lashes.
- Shade the roots, highlight a few tips, and add a contact shadow.
- Refine with Liquify and Warp.
- Optionally create a stamp brush for repeated use.
- Export layered or transparent files if the art is headed for animation or compositing.
Once you have the flick motion down, lashes take only a few minutes, and a layered file keeps them flexible for whatever comes next.