How to Add Design in a Brush in Procreate
StyleFrame Team7 min read
To add a design to a Procreate brush, draw it on a square canvas, save it as a JPG to your Photos app, then open Brush Studio and import it as the brush's Shape Source (a stamp) or Grain Source (a texture). Procreate reads only grayscale: white is opaque and black is transparent, so tap the imported image with two fingers to invert it if the result looks wrong. Finish by raising Spacing and testing the stroke in the preview pad.
How Procreate Reads a Design Inside a Brush
A Procreate brush has two image-based parts. The Shape is the stamp that gets repeated along your stroke. The Grain is a texture that shows through that stamp, a bit like paper tooth under a crayon. Your design can drive either one, and it can drive both.
Procreate converts whatever you import into luminance values:
- White paints at full opacity.
- Black is transparent.
- Grays produce partial transparency.
That means a brush cannot hold a full-color image. A detailed illustration becomes a grayscale stamp that paints in whichever color you've selected. If you were hoping to stamp a multicolor design directly, you'll need another approach, such as pasting it as a layer.
Prepare Your Design Before Importing
Most "my brush is blank" or "my brush looks blurry" problems start here, not in Brush Studio.
Start with a square canvas
Create a square canvas. Non-square sources get distorted. A size like 2048 × 2048 px is a common choice. Others recommend working even larger, such as 10 × 10 inches at 300 dpi, if you plan to use the brush at big sizes. A bigger source stays crisp when you scale the brush up.
Draw in pure black and white
If you want a solid, opaque stamp, use pure white on pure black (or the reverse, then invert later). Gray or colored artwork gives you a semi-transparent brush. That's useful when you want softness, but it's a surprise if you didn't plan for it.
A reliable workflow:
- Create a square canvas.
- Set the background to black.
- Draw your design in white (or grayscale, if you want varied opacity).
- Keep the design centered with some breathing room so the edges don't clip.
Export as a JPG, not a transparent PNG
This is the most common trap. A PNG with a transparent background and a black design gets read as an entirely blank square, because black means transparent to the brush engine. You have three safe options:
- Export a JPG, which has a solid background.
- Keep the PNG, but make the design white.
- Put a white background behind a black design before exporting.
You can also skip the export. Copy your whole canvas to the clipboard, then paste it directly into the Shape or Grain Source in Brush Studio. This makes a fast loop of draw, paste, test, and repeat.
Step-by-Step: Add Your Design as a Stamp (Shape Source)
Use this when you want your design to appear as a repeated mark: a leaf, a star, a heart, a splatter, a logo mark.
- Open the brush panel by tapping the brush icon.
- Create a custom brush set so your work stays out of Procreate's default packs. Scroll to the top of the set list and tap + to make a new set, then name it.
- Make a new brush. Tap + inside your set. Alternatively, swipe left on an existing brush and choose Duplicate. Duplicating is often smarter because you inherit sensible settings.
- Open Shape. In Brush Studio, choose Shape, then tap Edit on the Shape Source.
- Import your design. Tap Import and choose where it comes from: Photos, Source Library, or paste from the clipboard.
- Invert if needed. If the stamp paints as a box with your design cut out, tap the image with two fingers to invert it.
- Tap Done.
Your design is now the brush tip. It will probably look cramped or smeared on its first stroke, which is where the next settings come in.
Tune the Brush So the Design Reads Clearly
Stroke Path: Spacing
Spacing controls how often the shape stamps along your stroke. At low values the stamps overlap into a continuous smear. Raise Spacing until you see individual copies of your design. For a pure stamp brush, you generally want enough spacing that each instance stays distinct.
Jitter and Fall Off
Procreate's Brush Studio includes Spacing Jitter, Jitter Lateral, and Jitter Linear, which scatter stamps off the exact stroke line. Lateral jitter shifts stamps perpendicular to the stroke; Linear jitter shifts them along it. Both can respond to Apple Pencil pressure and tilt. Fall Off fades the stroke out as it continues, like running out of paint.
For scatter effects (foliage, confetti, particles) increase jitter modestly and vary size with pressure.
General: Orient to Screen
If your design is directional (an arrow, text, a character) open the General settings and turn on Orient to Screen. Otherwise the stamp rotates with the stroke direction, and your design may paint sideways or upside down.
Size limits
Under Properties, adjust the maximum and minimum size. If you want to paint a very large stamp, increase the maximum so you aren't capped by the default range.
Add a Design as a Texture (Grain Source)
Use the Grain Source when your image should be a texture rather than a mark: paper fiber, halftone, scanned ink, concrete, sponge.
- In Brush Studio, open Grain.
- Tap Edit on the Grain Source, then Import your image.
- Enable Auto-repeat if you don't want visible tile edges while painting.
Photos can work well as grain sources: tree bark, sand, scanned watercolor washes. Crop them to 1:1 first. If you want a seamless result, take extra care to blend the edges of the source or use Procreate's clone tool to patch seams before you import.
You can combine both: a custom stamp shape and a custom grain give a brush that is distinctive to your work.
Test, Save, and Organize
Use the drawing pad on the right side of Brush Studio to test as you adjust. Changes show up live. Then:
- Tap Done to save the brush into your set.
- Name it in the About This Brush tab.
- Test it on a fresh canvas at different sizes, pressures, and colors.
- Keep an untouched copy of your source image so you can reimport after edits.
Making a backup duplicate before heavy edits is a good habit, since it lets you revert if you push settings too far.
Troubleshooting Common Problems
The brush paints nothing. Your imported image is probably black on transparent. Re-export as a JPG, or make the design white.
It paints a filled square. The image is inverted. Two-finger tap the source to flip it.
The design looks blurry. The source was too small. Rebuild it larger.
The design looks stretched. The source wasn't square.
The design looks faint. It contains gray tones or low-contrast areas. Push your whites to pure white.
The stamp rotates oddly. Enable Orient to Screen in General settings.
Strokes smear rather than stamp. Raise Spacing in Stroke Path.
Where This Fits in a Motion and VFX Pipeline
If you work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, Procreate brushes are often a way to produce hand-made assets: texture passes, ink marks, grunge overlays, halftone patterns, and painted elements that you export as PNG or layered files and bring into your compositing app. Building these from your own scans and drawings gives you texture that is unique to your work, rather than something shared with every user of a stock pack.
Quick Reference
Final Thoughts
Adding a design to a brush comes down to preparing a clean, square, high-contrast image, importing it into the right source slot, and tuning Spacing and orientation until it reads the way you want. Once you've done it a few times, the loop of drawing, pasting, testing, and refining takes only minutes, and your brush library becomes a reusable set of personal assets for illustration, texture work, and motion design.