How to Add a Texture Layer in Procreate
StyleFrame Team8 min read
In Procreate, you add a texture layer by importing a texture image (Actions > Add > Insert a Photo or Insert a File), scaling it over the canvas with Uniform transform, and placing it at the top of the layer stack. Tap the "N" on that layer and switch the blend mode from Normal to Multiply, Overlay, or Linear Burn. Then lower the opacity until the grain supports the artwork without dulling it. The same approach covers paper, canvas, grain, and halftone looks, and you can also generate texture directly with the Noise and Halftone adjustments.
What a texture layer does in Procreate
A texture layer is an ordinary image layer, such as a paper scan, canvas weave, or grain photo, that sits above your artwork and blends into it. It adds tooth, imperfection, and tonal variation to flat digital color. Because it is a separate layer, you can change its strength, swap it, or hide it without touching your paintwork.
For motion designers and VFX artists, this is the same idea as a grain or paper overlay in After Effects: a surface pass that makes illustrated frames feel physical. Setting it up cleanly in Procreate keeps your source art flexible when it moves downstream.
How to add a texture layer, step by step
- Get the texture onto your iPad. Save it to Photos or Files. You can also drag and drop it from a browser or another app using Split View.
- Open your artwork in Procreate.
- Insert the texture. Tap the wrench (Actions), choose Add, then Insert a Photo for the camera roll or Insert a File for the Files app. The image lands on its own layer above your current layer.
- Scale it to cover the canvas. With the Transform arrow active, switch to Uniform so the proportions don't distort, then pull a corner until the texture covers the full canvas. Rotate or flip it if a certain area has a better grain pattern.
- Move it to the top of the layer stack. Anything below it will be affected. Anything above it will not.
- Change the blend mode. Open the layers panel and tap the "N" on the texture layer.
- Adjust opacity. Tap the layer and drag the Opacity slider until the effect is present but restrained.
If you add new layers beneath the texture later, they pick up the effect automatically, which makes it easy to keep painting after the texture is in place.
Picking the right blend mode
The blend mode determines how the texture and your art interact, so it matters more than the texture itself.
- Multiply darkens. White areas of the texture have no effect, and darker fibers or grain deepen your colors. It's the standard choice for paper textures on light artwork.
- Overlay adds contrast based on the texture's light and dark values. It tends to preserve vibrance better than Multiply.
- Linear Burn is a stronger darkening mode. It suits moody or heavily aged looks, but it can crush colors quickly.
- Normal with reduced opacity works when you want the texture's own color to show, for example a colored canvas weave.
Test two or three modes before settling. The best result changes with your palette and with how light or dark the artwork is.
Keeping color and detail intact
Texture layers always change the colors beneath them to some degree, but a few habits keep that shift under control.
Desaturate the texture. A yellowed paper scan set to Multiply will tint your whole illustration. Open Adjustments, choose Hue, Saturation, Brightness, and pull saturation down so the layer only contributes luminance.
Stack Multiply and Overlay. One reliable approach is to place the texture on a Multiply layer to reveal the grain, then duplicate it on Overlay above to restore some brightness. Both layers can sit at fairly low opacity, often around 10%, for a subtle result.
Adjust brightness and contrast on the texture itself. If the grain is too faint or too heavy, change the texture layer's curves or brightness before reaching for opacity.
Limit it to part of the piece. If you want texture only on the background, move the texture layer directly above that layer and turn on a Clipping Mask, so it affects only the layer below. You can also draw a selection and add a layer mask to the texture to hide it from areas such as faces or key typography.
Other ways to add texture in Procreate
Image overlays are the most common method, but they aren't the only one.
Noise adjustment
Select the layer, open Adjustments (the magic wand icon), and choose Noise. Drag across the screen to set the amount, then pick Clouds, Billows, or Ridges for different grain characters. Tap the wand again to commit. If you want it across the whole piece, duplicate the canvas and merge the layers on the copy first.
Halftone adjustment
Halftone, also under Adjustments, converts a layer into a dot pattern for a print-inspired look.
Knockout textures for print or apparel
For designs where the texture should reveal the background, such as a shirt color showing through ink, insert a transparent PNG texture and scale it over the artwork. Tap the texture layer, choose Select, then Invert. Hide the texture, then add a mask to each ink layer. When you deselect, the texture knocks through the artwork.
Tiling a small texture
If your texture is smaller than the canvas, you can duplicate the layer, align copies edge to edge using snapping, and merge them. This only looks right with seamless textures. Otherwise you'll see visible seams.
Where to find usable textures
You don't need a paid pack to get started:
- Photograph your own surfaces. Watercolor paper, canvas boards, walls, and fabric all work. Shoot flat and evenly lit.
- Scan physical paper. A flatbed scan gives clean, consistent grain.
- Free stock sites. Unsplash and Pixabay offer free texture photos, but check each license for your use.
- Commercial texture packs. These are often seamless and made for blend-mode workflows.
Use a high-resolution source. If you scale a small image up to fill a large canvas, the grain turns soft and blurry.
Taking textured Procreate art into a motion pipeline
If the artwork is headed for animation or compositing, a few decisions at export time save work later.
Export with the texture separate when you can. A layered export lets you keep the texture as its own layer so you can remove or replace it in After Effects. Check that your Multiply and Overlay blend modes carry over correctly. If something looks different, export a flat PNG of the clean art plus a separate texture pass.
Prefer a texture pass over a baked-in texture for moving work. A static paper grain baked into every frame can look like a screen-door effect when the artwork moves. Keeping grain separate lets you animate it, for example by cycling several grain frames at a low frame rate, or by locking one texture to the camera in your compositor.
Match your resolution to delivery. Create the canvas at or above your final frame size, since upscaling a textured image softens the grain.
Where Styleframe fits with textured Procreate art
Once your illustration has the look you want, Styleframe can help carry it into motion without giving up control. Styleframe is an AI video and motion tool built around reference images, video clips, and keyframes rather than one-click generation.
- Frames-to-Video lets you use textured Procreate frames as start and end keyframes, so the motion between them is driven by your artwork.
- Restyle and Ink-and-Paint use a reference image to transfer a style. A Procreate frame with paper grain and a defined line quality can act as that reference for other footage or renders, such as a Blender or Cinema 4D pass.
- 2D-to-3D, Turntable, and Remove Background are useful when a textured character or prop needs to be rotated or separated from its backdrop.
- 4K Upscale helps bring finished output to production resolution.
Treat any AI-generated result as a starting point to review and refine, especially fine paper grain, which can shift between frames and may need a controlled grain pass in your compositor.
Common problems and fixes
- Colors look washed out. Switch from Normal to Multiply or Overlay, desaturate the texture, and reduce opacity.
- The texture is invisible. It may be too light, or it may sit below the artwork. Raise contrast on the texture, or move it to the top.
- The texture looks stretched. Undo and redo the scaling with Uniform selected.
- The texture looks blurry. The source image is too small for the canvas. Use a larger file.
- The effect hits areas you want clean. Use a clipping mask or layer mask to restrict where the texture shows.
- You can't find the Insert option. Look under Actions > Add. Insert a File reads from Files, while Insert a Photo reads from the camera roll, so make sure you use the one that matches where the texture is saved.
A reliable default workflow
For most illustration work: insert a paper texture, scale it uniformly over the canvas, place it at the top, set it to Multiply, desaturate it, and drop opacity until it's felt more than seen. Add a second copy on Overlay if the colors need to recover brightness. Keep the clean artwork underneath untouched so you can export textured and untextured versions for whatever comes next.