How to Add a Color with Eyedropper in Procreate
StyleFrame Team8 min read
To add a color with the eyedropper in Procreate, touch and hold on the canvas (or tap the square Modify button) over the color you want, drag to preview it, then lift to set it as your active color. To save it, add it to a palette from the Colors panel. If the gesture isn't working the way you want, open Actions (wrench icon) > Prefs > Gesture controls > Eyedropper and choose a different trigger.
Quick steps: sample a color and keep it
- Open your artwork, or bring in a reference by choosing Insert a photo from the Actions menu.
- Activate the eyedropper using your configured gesture (touch and hold is the common choice) or by tapping the square Modify button on the sidebar.
- Drag across the canvas. A loupe shows the color under the cursor on top and your previous color underneath.
- Release to set the sampled color as your active color.
- Open the Colors panel and add the color to your active palette to save it.
That's the whole loop. The rest of this article covers the setup choices, how to keep the colors you sample, and how to carry them into a motion or VFX pipeline.
How the eyedropper works in Procreate
The eyedropper is a temporary sampling mode, not a tool you select from a toolbar. It reads the pixel under your finger or Pencil and sends that color to your active color slot. Because it runs on top of whatever brush you're using, you can sample, then keep painting without switching tools.
While you hold it, the loupe shows two colors: the one you're sampling on top, and the one you had before below. That split view is useful for judging whether a new color sits comfortably next to the last one, especially when you're building a limited palette for a styleframe or a title card.
Set up your eyedropper trigger
Procreate lets you choose how the eyedropper is invoked, and the right choice depends on whether you paint mostly with a finger, a Pencil, or both.
Open the gesture settings
- Tap the Actions menu (wrench icon).
- Go to Prefs > Gesture controls.
- Select the Eyedropper tab from the list on the left.
- Pick the activation method that suits you.
Choose a trigger that fits your workflow
- Touch and hold: Press and hold on the canvas with your finger to pull up the eyedropper. It needs no extra buttons, which makes it fast for quick sampling.
- Modify button: Tap the square button between the two sliders on the sidebar to open the eyedropper. This is handy if you'd rather not rely on gestures.
- Modify button plus Pencil: If you enable the matching option, you can hold your finger on the Modify button and the eyedropper appears wherever your Pencil touches the screen. It's the closest you can get to sampling with the Pencil alone.
- Apple Pencil double-tap: If you have a second-generation Apple Pencil, you can assign a double-tap on the barrel to call up the eyedropper.
One limitation to know about: Procreate doesn't currently let you summon the eyedropper simply by pressing and holding the Pencil tip on the canvas. If you want that, the workarounds above are what's available.
Add the sampled color to a palette
Sampling sets your active color, but it isn't stored anywhere permanent yet. You have a few ways to keep it.
Rely on Color History for short-term use
Procreate keeps your last ten colors in Color History, shown on the Disc, Classic, Harmony, and Value tabs of the Colors panel. Each new color pushes the oldest one out, and a new artwork starts with an empty history. On smaller iPads, the ellipsis button lets you switch the bottom readout between your active palette and your Color History.
Save the color to a palette
For anything you want to keep:
- Sample the color with the eyedropper.
- Open the Colors panel and switch to the Palettes tab, or stay on any mode that shows the active palette at the bottom.
- Add the current color to your active palette.
If you're building a palette from a reference image, repeat the sample-then-save routine for each key color. Name the palette something meaningful so you can find it again for the next project. Procreate also lets you import and create your own palettes, so a palette built for one client can live alongside others.
Check the exact values
For precision work, open the Value tab. It shows numeric and hexadecimal readouts, which is the easiest way to confirm what you actually sampled and to copy it elsewhere. Classic mode offers Hue, Saturation, and Brightness sliders, and Harmony shows suggested companions based on your selected shade, which is useful once you've sampled a base color and need supporting tones.
Sampling tips for cleaner color matching
- Zoom in before you sample. If the area has texture, grain, or anti-aliased edges, you may pick up a blended pixel rather than the flat color you wanted. Pinch in and sample from the middle of a shape.
- Mind your layers. What you sample depends on what's visible. If a texture or adjustment layer sits above your art, you may get a different result than you expect. Look in the Eyedropper tab of Gesture controls to see whether your version offers a sampling option, and hide overlays you don't want to pick up.
- Use the loupe comparison. Take advantage of the previous-color half of the loupe to check contrast before committing.
- Sample from a flattened reference. If you're pulling colors from a photo, place it on its own layer and keep it visible while you work. Remove it afterward so it doesn't end up in your exports.
- Lock in values early. When a color is critical, note the hex value from the Value tab right away rather than relying on your eye later.
Troubleshooting common problems
The eyedropper doesn't appear. Check the Eyedropper tab in Gesture controls and confirm a trigger is actually enabled. If you rely on touch and hold, make sure you aren't also assigning the same gesture to something else.
Pencil sampling doesn't work. As noted, a plain Pencil press-and-hold isn't supported. Use the Modify button method or the double-tap option instead.
The color looks different after sampling. Look at which layers are visible and whether any blend modes or adjustments are affecting the composite. Also confirm that the sampled swatch hasn't been altered by a later layer effect.
Your History is empty. That's normal in a new artwork. Colors only show up as you select them.
Taking Procreate colors into a motion pipeline
Many motion designers use Procreate for concept sketches, character color keys, and styleframe palettes before moving to After Effects, Cinema 4D, or Blender. A few habits make that handoff smoother.
Keep color values consistent
Write down or copy the hex values from the Value tab for your key colors, then enter them in After Effects' color picker, Cinema 4D materials, or Blender's color fields. If your Procreate canvas and your After Effects project use different color spaces, the same hex value can look different, so make sure the two match, or at least know how they differ, before you sign off on a palette.
Use the palette as a shared reference
Export or screenshot your finished palette and keep it in the project folder. Editors, colorists, and other artists can then match against it without opening Procreate. A palette swatch strip is also a fast way to set up a consistent look across a series of shots.
Where Styleframe fits
If your Procreate frames are heading toward animated shots, is one option to look at. As with any generative step, check the resulting colors against your palette in your comp and correct them there, where you already have your grading tools.
FAQ
Is the eyedropper in Procreate a tool I select?
No. It's invoked by a gesture, button, or Pencil action, and it works on top of whichever tool you're using.
Can I sample from a photo I imported?
Yes. Insert the photo from the Actions menu, keep it visible, and sample from it. Delete or hide the layer when you're done.
How many colors does Procreate remember?
Color History keeps the last ten colors you've used in each artwork. Anything you want to keep long term should go into a palette.
Can I use the Apple Pencil to trigger the eyedropper?
Not with a simple press and hold. You can use the Modify button together with the Pencil, or assign a double-tap on a second-generation Pencil.
What's the best way to get the exact color value?
Sample it, then open the Value tab to read the hexadecimal value and enter it into your other software.
Final thoughts
The eyedropper is simple once it's set up the way you work: pick a trigger in Gesture controls, sample from a clean area, and save the keepers into a palette. From there, the hex values give you a reliable bridge into After Effects, Cinema 4D, Blender, or Nuke, so the colors you chose on the iPad hold up through the rest of the pipeline.